User's Manual
Table Of Contents
- FCC and IC statements
- 1. Introduction
- 2. To mount the encoder
- 3. Electrical specification
- 4. To connect to Visionline or VingCard Vision
- 5. Configuration utility
- 6. To factory reset the encoder
- 7. Web interface (Visionline only)
- Appendix A: Quick reference of technical data
- Appendix B: To install the USBXpress driver
- Appendix C: To upgrade firmware
- Appendix D: Boot-up procedure
- Appendix E: More about how the encoder finds the server (Visionline only)
- Revision history
24
ASSA ABLOY Hospitality
66 1001 001-7
Appendix B: To install the USBXpress driver
Figure B1
1. All necessary files for the USBXpress
driver are found on the Visionline CD
under Drivers/USBXpress Driver;
double click on
USBXpressInstaller.exe and follow the
instructions.
2. Connect the RFID encoder by USB cable
to the computer.
3. Go to the Device Manager in Windows
and click the plus sign in front of
'Universal Serial Bus controllers'; see
Figure B1.
Figure B2
4. In the Device Manager, double click on
the USBXpress Device and make sure
that the USBXpress Device Properties
dialog says 'This device is working
properly' as in Figure B2.