User's Manual
Table Of Contents
- FCC and IC statements
- 1. Introduction
- 2. To mount the encoder
- 3. Electrical specification
- 4. To connect to Visionline or VingCard Vision
- 5. Configuration utility
- 6. To factory reset the encoder
- 7. Web interface (Visionline only)
- Appendix A: Quick reference of technical data
- Appendix B: To install the USBXpress driver
- Appendix C: To upgrade firmware
- Appendix D: Boot-up procedure
- Appendix E: More about how the encoder finds the server (Visionline only)
- Revision history
32
ASSA ABLOY Hospitality
66 1001 001-7
Revision history
Date
Change
By
March 8, 2012
Initial version
KG
April 13, 2012
Updated section Connecting via TCP/IP
Updated section Mounting kit
KG
October 17, 2012
Updated section Connecting via TCP/IP
Added information about the USBXpress driver
Updated screenshot 'Select Firmware Files for
Bootload'
Added information about configuration utility
Updated web interface
Added chapter about reset
Updated Quick reference of technical data with
information about PoE class 1 and maximum
current consumption for the encoder
Removed information about bootloader tool
Added appendix More about how the RFID
encoder finds the server
KG
January 25, 2013
'Emulate KDE' is now implemented
KG
July 3, 2013
Added information about VingCard Vision
KG
January 13, 2014
Modified chapter about web interface
Modified chapter about installing USB Xpress
driver
Added chapter about boot-up procedure
KG
December 21, 2015
Updated layout
KG