User's Manual

13
ASSA ABLOY Hospitality
66 8003 015-3
1.5.1 Thermostat event report
The thermostat event report shows all events that have been sent online from the
thermostats or been transferred to the server via Orion Service; see Quick reference
guide Orion Service for details. The housekeeping function keeps the list size limited
by removing events that are older than a user defined number of days; default is
7 days. To look at a thermostat event report:
1. Double click on Thermostat events under the Reports tab in the
navigation window.
2. Enter the applicable search filter(s) under the tabs Events, Door or Miscellaneous
(see more information below) before pressing the Enter key or clicking OK.
Note: At least one of the following requirements must be met:
- a room is selected
- one or two event sub groups are selected
3. It is also possible to reload a previous search filter: click the Load… button in
the Events - Search filter dialog, browse to the desired file, mark it and click
Open. If you want to save a search filter for future searches: click the Save…
button, browse to where you want to save the file, give it a name and click Save.
If the filter should be shown under Custom in the Reports tab, it must be saved
in any of the following locations:
- the folder ’Custom Reports’ in the software installation folder
- the public documents folder
- the documents folder
The search filters that can be applied on thermostat events are:
Events – with this filter you can pick
out a specific event, or certain types
of events. The main types are Status
Changed and Alert. Within each main
type, there are event sub groups
which can be divided further into
specific events. If needed, use the
Check all/Uncheck all buttons at
the bottom of the dialog.
Figure 2
Door – with this filter you can pick
out events for a certain room. Click
the plus sign to expand a door area
and mark the applicable door.
Figure 3
Miscellaneous – with this filter
you can pick out events from certain
event dates.
Figure 4