User's Manual

24
ASSA ABLOY Hospitality
66 8003 015-3
1.8.1 Operator template X-reference
At Tools/Operator template X-reference, it is possible to change the operator
template authorities for thermostat events, thermostats, thermostat profiles and
EMS summary. By default, all default operators (manager, system manager, user and
user advanced) can view the concerned dialogs. System manager can by default also
add, update and remove thermostats and thermostat profiles. To change the authority
for system manager, a distributor must be logged on. New operator templates (e.g.
Test Template in the example screenshots below) will by default neither be able to
view the concerned dialogs, nor add, update or remove items in the dialogs where this
is applicable. To modify the authorities:
1. Go to Tools/Operator template X-reference.
Figure 8
2. Under the Database alternative in the drop-down-
menu, click the plus sign in front of the concerned
item. For the items Thermostat events and EMS
summary, the only available alternative is View
(see Figure 8). For the items Thermostats and
Thermostat profiles, the alternatives View, Add,
Update and Remove are available; see examples
in the screenshots to the right. Mark the applicable
alternative to the left and unmark/mark the
concerned operator template(s) in the right
part of the dialog.
Figure 9
3. Under the Energy management alternative in the
drop-down-menu, mark the applicable choice in the
left part of the dialog. The checkboxes to the right
will reflect anything that has been saved in the
Operator template details dialog; see section
Operator templates for details. In the right part
of the dialog, mark/unmark the applicable
operator template(s).
4. If applicable, repeat step 3 with other alternatives
in the left part of the dialog.
5. When all applicable changes according to steps 2-4
above have been performed, click OK.
Figure 10