User's Manual

14
ASSA ABLOY Hospitality
66 3081 004-23
To set up SysMon authorities:
1. Double click on Operator templates under the Lists tab in the navigation window
of the client.
2. Mark an existing operator template and click Properties, or click Add to create
a new operator template.
3. In the Operator Template Details dialog, click SysMon in the left pane.
4. Mark the applicable checkboxes for operations that operators belonging to the
template should be allowed to perform in SysMon.
5. If an existing operator template was updated with SysMon information, click
Update and Close. If a new operator template was created, enter applicable
information for the operator template under the other panes General, Database
etc and then click Save and Close.
Figure 4
Online settings and commands are made in the client.
If a dialog in the client should be refreshed due to online changes, this is shown with
a * in the dialog caption. Click the Refresh button in the dialog.
Different operator templates can be given different authorities for online commands;
see sections 4.3 Set up operator templates in a hotel system and 4.4 Set up operator
templates in an access control system respectively.
For online settings, see chapter 4 Online settings in the client.
For online commands, see the user manual for the client (the sections about
online commands for a door and about commands under the Online tab).
For supervision of the system, see chapters 6 System operation and
7 Commissioning.