User's Manual

17
ASSA ABLOY Hospitality
66 3081 004-23
3. Installing online devices
The online devices were designed to allow for maximum flexibility during installation.
There are no particular location specifications as long as the devices are within
reasonable range of each other and good radio communication can be attained.
Generally, the range is however around 20 metres or through a wall. The range
of the devices depends to large extent on the building material(s) in the
surroundings. As much effort as possible should be made to securely install each
device in a location where it will be dry, cool, and undisturbed, yet still maintain
good radio contact with its parent or children.
Important: The ZigBee communication can be disturbed by e.g. Wi-Fi networks;
always make sure to have as long distances as is physically possible between ZigBee
devices and other radio equipment. If this still causes problems at a site, automatic
channel change can be enabled. See more information about automatic channel
change in section 9.1.1.
This section will discuss the installation methods for each device in the system as
well as options for forcing devices to connect to specific parent devices.
Software requirement:
Hotel system: version 1.9.0 or later
Access control system: version 1.6.0 or later