User's Manual

39
ASSA ABLOY Hospitality
66 3081 004-23
4.3 Setting up operator templates in a hotel system
In the Operator Template Details dialog, it is possible to set up what online
commands a certain operator template should be allowed to perform. See the section
about the Online tab in User manual Visionline for further information about the
different online commands.
To set up/modify an operator template:
Figure 44
1. Double click on Operator templates under the Lists tab in the
navigation window.
2. Mark the desired operator template and click Properties to open the
Operator Template Details dialog (or click Add to add a new operator
template; in that case, also make the appropriate choices under the other
alternatives in the left part of the Operator Template Details dialog).
3. Mark Online in the left column.
4. Check the applicable online operation(s) to the right.
5. Click Update, if an existing operator template was updated; click New or
Save if a new operator template was created.
Note: 'Allow emergency open' is by default only available for the distributor.
Discuss with your distributor if this choice should be available for any other operator.