User's Manual

42
ASSA ABLOY Hospitality
66 3081 004-23
5. Issuing a ZigBee configuration card
The ZigBee configuration cards are smart/4k cards that are used for setting up online
locks of ZigBee type. The following cards are available:
Type
Description
Set subproduct ZigBee
Sets the lock in ZigBee mode
Start discovery in ZigBee
See section 1.8 Discovery. This card also sets the lock in
ZigBee mode.
Start orphan join in ZigBee
See section 1.9 Orphan join.
Check ZigBee status
See section 7.3 Check online status with card
Construction mode
See section 6.3 Set in construction mode
Enable EMI events Note: This also
requires the enable EMI events option.
See below the EMI events that are sent to the thermostat from
the lock:
- 0. Guest entrance
- 1. Staff entrance
- 2. Inside open
- 3. Dead-bolt thrown
- 4. Dead-bolt released
- 5. Door closed
- 6. Battery status
Disable EMI events
Remove all sub products
Removes all sub products from the lock
Table 4
Figure 46
1. Double click on ZigBee configuration in the
navigation window.
2. Select a cardholder from the operator list by
clicking the button; double click on a name
or mark the name and click Select.
3. Choose the expiration time of the card: enter
the number of days for which the card shall
be valid, or click the button next to the
Expiration time field and mark a date in
the calendar (or enter a date manually).
The chosen date will appear at Expiration
time; the number of days will change
accordingly.
4. At Type, choose the applicable card type;
see the list of available cards above for
more information.
5. If you want a receipt for the cardholder to sign,
check Print receipt. If you want an additional
text of your own choice, you can add this
under Tools/Options/Printer/Receipt,
'Note on receipt'; maximum 765 characters.
This text will be added to all staff/operator
receipts until it is changed or deleted.
6. Click Make card; present a card at
the encoder.