User's Manual
Table Of Contents
- FCC and ISED (IC) statements
- 1. Introduction
- 2. Installing the option
- 3. Installing online devices
- 4. Online settings in the client
- 5. Issuing a ZigBee configuration card
- 6. System operation
- 7. Commissioning
- 8. Power loss and hardware failure
- 9. Redundancy and recovery
- Appendix A: Online devices
- Appendix B: Mounting of gateway and router
- Appendix C: Example configurations
- Appendix D: Web interface for gateway
- Appendix E: Reset of gateway
- Appendix F: Gateway boot-up
- Appendix G: More about how the gateway finds the server
- Appendix H: Firmware upgrade
57
ASSA ABLOY Hospitality
66 3081 004-23
Router
Figure A2
Powered by a power adapter (5VDC)
Low power consumption
Can have either five routers or 15 endnodes connected as direct descendants
There can be a maximum of five hops down the gateway (i.e. gateway - router - router -
router - router - endnode). This limits the physical coverage of a PAN.
Important: Even though it is possible to have five hops, it is recommended to
have maximum three hops, i.e. gateway - router - router - endnode. The link
quality index (LQI) should be at least 30%.
Case with the dimensions 40 mm x 105 mm x 19,5 mm (1,57" x 4,13" x 0,77")
Easy mounting (can be mounted either with adhesive VELCRO
®
strips or fastening screws;
a package with two VELCRO
®
strips and two fastenings screws are enclosed)
Weight: 36 g
Flame retardant ABS
UL94 V-0 approved
Colour: RAL 7047
Suitable for operation in the range 5-50º C and
10-90% non-condensed relative humidity