User's Manual
Table Of Contents
- FCC and ISED (IC) statements
- 1. Introduction
- 2. Installing the option
- 3. Installing online devices
- 4. Online settings in the client
- 5. Issuing a ZigBee configuration card
- 6. System operation
- 7. Commissioning
- 8. Power loss and hardware failure
- 9. Redundancy and recovery
- Appendix A: Online devices
- Appendix B: Mounting of gateway and router
- Appendix C: Example configurations
- Appendix D: Web interface for gateway
- Appendix E: Reset of gateway
- Appendix F: Gateway boot-up
- Appendix G: More about how the gateway finds the server
- Appendix H: Firmware upgrade
62
ASSA ABLOY Hospitality
66 3081 004-23
Appendix E: Reset of gateway
If the gateway parameters need to be reset to default values, e.g. if a gateway should
be used at a demo installation, press and hold the F button while powering up the
gateway.
Parameter
Default value
Dynamic IP address (DHCP; Dynamic Host Configuration
Protocol)
Enabled
Host IP address
192.168.0.100
Default gateway
192.168.0.1
Subnet mask
255.255.255.0
Announcement broadcast
Enabled
Server port
7799
Table E1: Default values and descriptions of gateway parameters