User's Manual

5 66 1402 203-5
66 1402 203-1
20. Use the tabs on the sides of the mounting plate
to keep the cables in place; see Figure 16.
Figure 17
21. Thread the battery cover
Signature onto the
mounting frame.
22. Use a screwdriver Torx TR20
to fasten the battery cover
Signature.
23. Use a service cable and Lock Service 3G
to upload the BLE lock firmware, 3.47.XX.
The firmware is included under the Upload
firmware alternative in Lock Service 3G;
see Quick reference guide Lock Service 3G
for details. If a later firmware version is
available, first use the Download firmware
alternative; see Quick reference guide Lock
Service 3G for details.
ASSA ABLOY Hospitality APAC: e-mail [e-mail], phone [phone]
ASSA ABLOY Hospitality EMEA: e-mail [e-mail], phone [phone]
ASSA ABLOY Hospitality North America: e-mail [e-mail], phone [phone]
ASSA ABLOY Hospitality Latin America: e-mail [e-mail], phone [phone]
Figure 18
Figure 16