User's Manual

58
DRAFT 66 8003 002-11
5. To check the installation
5.1 To check diagnostics
When a new thermostat has been set up according to this step-by-step procedure,
the status of the thermostat should be checked in Orion Servic e:
Figure 99
1. Choose Diagnostics intheleftpaneoftheOrion Servic e window.
2. Connec t the service cable to the thermostat and click the Start button
in Orion Servic e.
Item
Status shown
Door switch Yes/No
Motion sensor Yes/No
HVAC Fan speed
Occupancy Unsold/unoc c upied/occupied/unknown
Temp sensed/set 'Temp sensed' is the temperature in the room; 'temp set' is
the temperature which the guest has set on the thermostat
Door state Opened/closed
Ext. door state Opened/c losed for an external door (applic able if a
door switch has been c onfigured as 'external door')
Table 6
Note:
If exterior or interior door is left open for more than 2 minutes, the word 'DOOR'
is shown in the t hermostat display until the door is c losed again.