User's Manual
Table Of Contents
- Table of contents
- FCC and IC statements
- 1. Introduction
- 1.1 Orion EMS devices
- 1.2 Terminology
- 1.3 General about Orion Service
- 1.4 General about alarms
- 1.5 Events and commands
- 1.6 Basic EMS logic
- 1.7 Orion EMS parameters
- 1.8 Operator templates
- 1.9 Setback override
- 2. Thermostat buttons and display
- 3. Energy management summary and alarm list
- 4. Real time room status
- 5. Thermostats list
- 6. Occupancy report
- 7. Energy statistics report
- 8. Tools/Options
- 9. Orion EMS in SysMon
- 10. Maintenance
- Appendix A: Quick reference of technical data
- Appendix B: Troubleshooting
- Appendix C: Read more
- Revision history
29
DRAFT 66 8003 001-8
2.2.2 Thermostat display
Figure 17
The thermostat displays settings and operation details to the guest, such as
room temperature and heat/cool indications.
Display details:
Temperature Display: The temperature display area shows the actual room
temperature or the set temperature as well as the indication of Fahrenheit or
Celsius. When the displayed temperature is the guest setting, not the actual
room temperature, the SET indicator is also displayed.
Note: Whenever a guest is changing the setting, the SET temperature
will display.
Heat/Cool Indicator: The thermostat displays universal icons for heating and
cooling. The snow star is the symbol to indicate the unit is in cooling mode and
the flame is the symbol to indicate heating mode.
Fan Display: The fan display shows the fan speed of the unit. As the fan speed
increases, additional segments or the indicator are displayed. When in AUTO fan
mode, the word AUTO will appear in the middle of the display (at the
Miscellaneous Indicator, see below).
Miscellaneous Indicator: The indicator in the middle of the display is a multi-
purpose indicator. It e.g. displays the word AUTO when the automatic fan mode
is enabled and OFF when the unit is turned off.