User's Manual

42
DRAFT 66 8003 001-8
9. Orion EMS in SysMon
The maintenance software SysMon (System Monitor) is found in the VISIONLINE
installation folder and also in the installation folder for the separate Orion EMS,
if the latter is applicable. It contains several dialogs, of which
the ones below are applicable for Orion EMS:
thermostats
online commands
broadcasts
room events
To open SysMon:
1. Double click on SysMon.exe in the installation folder.
Tip: Make a shortcut to SysMon since this will be extensively used.
Note: The Broadcasted commands dialog is not automatically updated;
press F5 to refresh it manually.
1. Go to View/Broadcasts.
2. To see details for a certain
command, mark it in the list
and click the Details button.
3. A Broadcast Answers
dialog will be shown, with
the concerned thermostats or
locks (depending on command)
and their answer time.
Figure 62
Column
Description
Registration Number
Uniquely identifies the broadcasted command.
The registration number will be shown in the
events
the command generates.
Command
# Answers
The number of locks that have answered
the command
Last Transmission
Timestamp when the command was last
broadcasted; originally or due to a retry.
Succeeded
Yes if all locks answered
Cancelled
Yes if the command was cancelled by another
broadcast; e.g. a new Set-Time command
cancels any previous Set-Time command.
Buffered
Yes if the command has timed out. It has then
been buffered as a single-cast command for all
locks that have not answered.
Table 9