User's Manual
Table Of Contents
- Table of contents
- FCC and IC statements
- 1. Introduction
- 1.1 Orion EMS devices
- 1.2 Terminology
- 1.3 General about Orion Service
- 1.4 General about alarms
- 1.5 Events and commands
- 1.6 Basic EMS logic
- 1.7 Orion EMS parameters
- 1.8 Operator templates
- 1.9 Setback override
- 2. Thermostat buttons and display
- 3. Energy management summary and alarm list
- 4. Real time room status
- 5. Thermostats list
- 6. Occupancy report
- 7. Energy statistics report
- 8. Tools/Options
- 9. Orion EMS in SysMon
- 10. Maintenance
- Appendix A: Quick reference of technical data
- Appendix B: Troubleshooting
- Appendix C: Read more
- Revision history
43
DRAFT 66 8003 001-8
9.1 Thermostats
The Thermostats dialog of SysMon gives a good overview of all thermostats; if there
are any alarms, if any thermostats have been overridden etc.
To show a thermostat overview:
1. Go to View/
Thermostats.
Figure 63
Column
Description
Room
Room number
Last contact
Time when last telegram was sent from the thermostat
Status
Online/Offline
Temp
Room temperature
Setpoint
The temperature which the guest has set on the
thermostat
Occupancy
Unsold/Unoccupied/Occupied
HVAC
Off/Cooling/Heating
Alarm
Yes/No
Ovr setback
This column shows if the thermostat in the concerned
room has been overridden; Yes/No
Table 10