User's Manual
Table Of Contents
- Table of contents
- FCC and IC statements
- 1. Introduction
- 1.1 Orion EMS devices
- 1.2 Terminology
- 1.3 General about Orion Service
- 1.4 General about alarms
- 1.5 Events and commands
- 1.6 Basic EMS logic
- 1.7 Orion EMS parameters
- 1.8 Operator templates
- 1.9 Setback override
- 2. Thermostat buttons and display
- 3. Energy management summary and alarm list
- 4. Real time room status
- 5. Thermostats list
- 6. Occupancy report
- 7. Energy statistics report
- 8. Tools/Options
- 9. Orion EMS in SysMon
- 10. Maintenance
- Appendix A: Quick reference of technical data
- Appendix B: Troubleshooting
- Appendix C: Read more
- Revision history
46
DRAFT 66 8003 001-8
10. Maintenance
10.1 Thermostat (Orion Thermostat-Zen-HV)
10.1.1 To disassemble a thermostat
1. Use a flathead screw driver to loosen the
thermostat; bend the locking arms and in the
same time pull carefully.
Figure 68
2. Use the flathead screw driver to bend the
locking arm at the bottom of the thermostat;
at the same time pull carefully.
Figure 69