User's Manual

ACG HF Multi ISO RFID Reader V1.0
ACG Identification Technologies GmbH 49
12.3.4.6 Single Shot (default 0)
If Single Shot is set, the reader displays the serial number of a tag in continuous read
mode once within a specified time-out. The time-out is defined at EEPROM register
0Fh.
The delay time can be adjusted stepwise in 100ms steps. 00h indicates no delay and
FFh indicates infinite delay.
12.3.4.7 Extended Protocol (default 1)
If Extended Protocol is set, the transfer data telegram command supports ISO14443-
4 and automatically process the WTX and chaining for smaller frames.
If sending ISO 14443-3 commands this flag has to be switched off.
The transfer data telegram command is only supported in normal mode, not in
transmit / receive mode.