User's Manual

ACG HF Multi ISO RFID Reader V1.0
ACG Identification Technologies GmbH 55
12.3.11 Reset Recovery Time (15h)
The Reset Recovery Time register represents the recovery time in ms after the field
is turned on.
This register is used for the select, continuous read and multi-tag commands.
Default value is 25h.
12.3.12 Application Family Identifier (16h)
The AFI (Application Family Identifier) is only supported for ISO14443B and
ISO15693 tags. If the set value is different from 00h, the AFI is used. Only
transponders with an identical AFI will answer to the reader.
Default value is 00h.
12.3.13 Selection Time-out ISO 14443A (17h)
The Selection Time-out represents the reader card communication time-out for the
select, high speed select, continuous read, multilist, multiselect and mifare
®
login
command with ISO 14443A tags. Use low values for a better reaction time between
the card and the reader. One time slice is around 300us.
The default value is 10h.
12.3.14 Selection Time-out ISO 14443B (18h)
The Selection Time-out represents the reader card communication time-out for the
select, high speed select, continuous read, multilist and multiselect commands with
ISO 14443B tags. For a better reaction time, use low values. One time slice is around
300µs.
The default value is 50h.
12.3.15 Selection Time-out SR176 (19h)
The Selection Time-out represents the reader card communication time-out for the
select, continuous read, multilist and multiselect command with SR176 tags. For a
better reaction time, use low values. One time slice is around 300µs.
The default value is 10h.
12.3.16 Selection Time-out ISO 15693 (1Ah)
The Selection Time-out represents the reader card communication time-out for the
select, high speed select, continuous read, multilist, multiselect and mifare® login
command with ISO 15693 tags. Use low values for a better reaction time between
the card and the reader. One time slice is around 300us.
The default value is 20h.