2010 PRODUC T C ATALOG YOUR SINGLE SOURCE FOR ACCESS CONTROL ACCESSORIES
Intelligence iMXDa NEW PRODUCTS FOR 2010 Form & Function CEPT The iMXDa is the only integrated door motion exit delay system that features a learning alarm initiate gap from 1/8” to 1 full inch. See page 30. Dependability DSB With a unique combination of Touch Sensing and mechanical movement, the Dual Sense Bar is the safest, most dependable exit device available for releasing magnetically locked doors. See page 33.
Contents The finest quality products for all your electric locking system requirements! Electromagnetic Locks & Accessories M32, M34R, M38, M62, M68, M82, SAM, SAM2, Brackets, Accessories Electromechanical Locks MM15 E-Mag, UnLatch, Mortise UnLatch Take advantage of our website! www.securitron.
Electromagnetic Locks and Accessories Genuine Magnalock Selection Guide ® Out-Swing Door Magnalock Selection Guide Locks Mounted on the Secure Side of the Door & Door Swings away from Secure Side Dual Doors will require two locks (X2), one for each leaf except for DM62 Preferred Application = Door Type M32 Also Acceptable for Application = M38 M62 DM62 M68 * Glass Door w/Aluminum Frame M82B SAM SAM2-24 * Wooden Door (Traffic Control) Wooden Door (High Security) Metal Door (Traffic Control) Met
Electromagnetic Locks and Accessories M32 Series 600 lbs. Holding Force Magnalock ® 600 lbs. holding force Magnalock with automatic dual voltage. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.
Electromagnetic Locks and Accessories M34R Series 500 lbs. Holding Force Recessed Magnalock ® 500 lbs. holding force Magnalock with automatic dual voltage for mounting in sliding doors. This results in an aesthetically appealing finished appearance. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.
Electromagnetic Locks and Accessories M38 Series 600 lbs. Holding Force Magnalock ® 600 lbs. holding force Magnalock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique and simplified method of installation. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.
Electromagnetic Locks and Accessories M62 Series 1200 lbs. Holding Force Magnalock ® 1200 lbs. holding force Magnalock with automatic dual voltage. Recommended for exterior and perimeter doors through which criminals could gain entrance to cause substantial economic loss. Features & Benefits • • • • • • • • • 8” [203mm] 3” [76mm] 2.75” [70mm] 1.75” [44mm] .5” [12mm] 6” [152mm] Specification Data The M62 requires 2.
Electromagnetic Locks and Accessories DM62 Series Double Magnalock ® For double doors without a center mullion, the DM62 supplies two model 62 Magnalocks in a single, brushed stainless steel housing.
Electromagnetic Locks and Accessories M68 Series 1200 lbs. Holding Force Magnalock ® 1200 lbs. holding force Magnalock with automatic dual voltage. This model offers a built-in wire access chamber and new bracket mount design for a unique method of installation. Recommended for interior and perimeter doors through which criminals could gain entrance to cause substantial economic loss.
Electromagnetic Locks and Accessories M38 and M68 Options and Upgrade Kits Senstat Door Position The Senstat option provides a lock status sensing signal which positively indicates that the door is secure. This interfaces with access control or alarm systems and is superior to the commonly used door position switch which indicates that the door is closed but not that it is secure. All Senstat Magnalocks use Form ‘C’ isolated contacts. Order from page 7 or page 10.
Electromagnetic Locks and Accessories M82B Series 1800 lbs. Holding Force Magnalock® 1800 lbs. holding force Magnalock with automatic dual voltage and magnetic bond sensing function standard. Preferred by prisons and detention facilities, and also functions best on large, high security gates. Features & Benefits • • • • • • • 1.75” [44mm] 12” [305mm] 3” [76mm] 2.75” [70mm] 9” [229mm] .5” [12mm] The M82B requires 2.
Electromagnetic Locks and Accessories SAM Shear Aligning Magnalock ® 1200 lbs. holding force Shear Aligning Magnalock mounts fully concealed into wood, steel or aluminum doors. SAM can also be installed in any position on the door - top, side or bottom and is ideal for swing through and sliding doors.
Electromagnetic Locks and Accessories SAM2-24 Shear Aligning Magnalock ® 600 lbs. holding force Shear Aligning Magnalock mounts fully concealed and is ideal for smaller applications, like cabinet doors and sliding closet doors. 24VDC only. Features & Benefits • • • • • • • • • 1.
Electromagnetic Locks and Accessories Magnalock ® IK - Installation Kit Securitron’s original Installation Kit includes the following: SDG-1 Heavy Duty Drill Guide BPT-2 Blind Nut Placement Tool SB-1 Sex Bolt - 32/62/82 SD-375 T-Handle Hex Wrench SEP-1 Hardware Pack - M62, M82 SEP-2 Hardware Pack - M32 RW-1 Rubber Washers FW-1 Flat Washers ICC-1 Insulated Crimp Connectors TL-1 Threadlock The complete IK and IK2 kits offer COD-125 1/8” Cobalt Drill Bit substantial savings over
Electromagnetic Locks and Accessories SB-1 Replacement Sex Bolt and TDK-1 Thick Door Kit • SB-1 Thick Door Kit for the SB-1 Sex Bolt (used on M32, M38, M62, M68, and M82B Magnalocks) allows the SB-1 to be used on doors thicker than 1-3/4” up to 3” SB-1 SB-1-03 SB-1-10B TDK-1 TDK-1 Sex Bolt - Replacement, Clear Sex Bolt - Replacement, Polished Brass Sex Bolt - Replacement, Oil Rubbed Bronze Thick Door Kit SWB - SAM Wood Bracket • SWB 2” [51mm] 1.
Electromagnetic Locks and Accessories DC - Dress Covers • • • Available for the M32, M38, M62, M68 and M82 Install using foam adhesive tape M32, M62 and M82 available in four finishes DC-32CL DC-32BK DC-32SP DC-32BP DC-38BK DC-38SP DC-38BP DC-62CL DC-62BK DC-62SP DC-62BP DC-68BK DC-68SP DC-68BP DC-82CL DC-82BK DC-82SP DC-82BP Dress Cover - M32, Clear Dress Cover - M32, Black Dress Cover - M32, Stainless Polished Dress Cover - M32, Brass Polished Dress Cover - M38,
Electromagnetic Locks and Accessories TJ - M38/68 Inswing Door Kit - Top Jamb • • Used to mount the M38 or M68 lock on the secure side of a door that swings into a secured area Includes a Z-Bracket and an oversized Dress Cover TJ-38CL TJ-38BK TJ-68CL TJ-68BK Inswing Door Kit - M38, Clear Inswing Door Kit - M38, Black Inswing Door Kit - M68, Clear Inswing Door Kit - M68, Black ASB - Aluminum Shim Bracket • • • Used when a blade stop requires the Magnalock to be lowered Comes pre-dril
Electromagnetic Locks and Accessories HEB - Header Extension Bracket • • • 90 degree angle brackets Extends narrow headers to permit proper mounting of Magnalocks Available in clear aluminum or black anodized HEB-3CL-8 HEB-3BK-8 HEB-3CL-12 HEB-3BK-12 Header Extension Bracket 3” Clear 8” Header Extension Bracket 3” Black 8” Header Extension Bracket 3” Clear 12” Header Extension Bracket 3” Black 12” CWB - Concrete Wood Bracket • • • Used on wood or concrete filled metal frames Provides a concea
Electromechanical Locks and Accessories MM15 E-Mag 4000 lbs. holding force dual voltage, dual current Maglock for interior or perimeter doors where ultra-high security and compact size are required. MM15 is a hybrid design with two spring loaded, hardened steel jaws. In the event of a forced entry attempt, the mandibles rotate inward, clamping down and capturing the edges of the armature. 5.13” [130mm] Features & Benefits 2.56” [65mm] 1.38” [35mm] 2.76” [70mm] 1.09” [28mm] .
Electromechanical Locks and Accessories TS - Tamper Shield - How To Order Part # MM15-TS Description MM15 Tamper Shield, Stainless Note Tamper Shield fully encloses lock face completely preventing unwanted access to MM15 Strike Plate using foreign objects MM15-TS SFP - Stop Filler Plates - How To Order Size 3/8” 3/8” 1/2” 1/2” 5/8” 5/8” Part # SFP-3/8CLMM15 SFP-3/8BKMM15 SFP-1/2CLMM15 SFP-1/2BKMM15 SFP-5/8CLMM15 SFP-5/8BKMM15 Description MM15 SFP, 3/8” Clear 6” MM15 SFP, 3/8”
Electromechanical Locks and Accessories UNL/MUNL UnLatch Strike / Mortise UnLatch Strike ® ® UnLatch/Mortise UnLatch is for any application where an electric strike would be used for a cylindrical/tubular (UNL) or mortise type (MUNL) lockset. UnLatch supports full dead latch function, releases under pressure and includes a latch status monitoring output. The Mortise UnLatch includes field adjustability for latch and deadlatch positions. 1.5” [38mm] 1.33” [33mm] Features & Benefits 3.
Gate Locks and Accessories M62FG-SASM 1200 lbs. Holding Force Gate Magnalock ® 1200 lbs. holding force weatherproof face-mounted Magnalock with conduit fitting and automatic dual voltage. Shock Absorbing Strike Mount (SASM) controls excessive impact between the strike and the Magnalock, dramatically prolonging the life of the lock, gate and other hardware. SASM is available with the M62FG, or as an individual kit to retrofit existing M32, M62 or M82 Gate Magnalock installations.
Gate Locks and Accessories GL1 2000 lbs. Holding Force Gate Lock The GL1 Electromechanical Gate Lock is designed to secure a wide variety of vehicle and pedestrian gate applications where security and weather resistance are required. The GL1 functions equally well in both electrically and manually operated gate installations and can be used for swing gates, sliding gates, stock cage gates or other applications. .5” [13mm] 1” [26mm] Self-Aligning Receiver 3.25” [82mm] • • • • • • • • • • • • 2.
Gate Locks and Accessories FMK Flex-Mount Gate Lock Bracket Kits The Flex Mount Bracket System is an intuitive set of mounting brackets designed exclusively for use with the 1200 lb. M62FG Magnalock and the 2000 lb. GL1 Gate Lock. Using pre-formed post channels and plates of varying lengths, a professional looking high security gate lock mounting platform can be assembled in minutes without special tools.
Gate Locks and Accessories CCM1/CCM1-Solar Cellular Control Modules Today, it no longer matters where you are in relation to your important business assets. Now you can use a cell phone or internet connection to take complete control of those assets through virtually any electric gate or lock. Securitron’s CCM-1 is a self-contained cellular based access control system that is easy to install.
Gate Locks and Accessories CCM2 - Wiegand Cellular Control Modules CCM-2 allows you to use a cell phone or internet connection to take complete control of any existing Wiegand Keypad or Card Reader. Once installed, CCM-2 converts any Wiegand keypad or reader to 100% cellular. The CCM-2 is designed to provide a state-of-the-art solution for any point of access control, regardless of its remoteness or entry system being used.
Cabinet Locks MCL 200 lbs. Holding Force Magnalock ® Typical applications include: jewelry cases, museum cases, gun cabinets, pharmaceutical storage cabinets, cash drawers and any type of door or drawer which will physically accommodate the lock. Works in both swinging and sliding cabinet door applications. Features & Benefits 4.625” [117mm] 1.1” [28mm] 1.14” [29mm] .75” [19mm] .25” [6mm] 3.
Cabinet Locks M32-SS Magnalock ® Split Strike Cabinet Lock 300 lbs. holding force per strike (600 lbs. total). Typical applications include: retail display cases, chemical and pharmaceutical storage cabinets, inventory cages and other cabinets that utilize outswinging doors with a common center latching point. Indoor or outdoor operation.
Exit Delay iMXDa Integrated Movement Exit Delay with Advanced Technology iMXDa helps prevent peril to persons/patients and property loss/theft for businesses. Applications include dementia wards, hospitals, dormitories, airports, child care facilities and retail or warehouse environments. Installation requires no alteration or replacement of existing fire-rated or non-fire-rated latching hardware. False triggering is eliminated by up to 1” of authorized door movement.
Exit Exit Delay Delay Component EXD Modular Exit Delay System Securitron’s UL/cUL Exit Delay System complies with NFPA 101 Life Safety Code and conforms to BOCA, UBC, SBC and National Building Code of Canada. This modular approach suits any door’s specific locking requirements as well as the desired level of physical security. 1) Select a LOCKING DEVICE (one per door) Determine type of mounting - Direct Mount, Bracket Mount and Shear Mount Determine holding force required - 600 lbs. to 1,800 lbs.
Exit Delay SB-MXD Exit Delay Initiate Device The SB-MXD consists of several components which will produce an initiate signal for delayed exit as controlled by Securitron’s XDT logic timer. The distance depends on the door type and gap between the door and frame. This distance is typically in the 1/2” - 3/4” range [1218mm]. How To Order 2” [51mm] .96” [24mm] 1.
Touch Sense Devices DSB Dual Sense Bar The Dual Sense Bar (DSB) is for use on magnetically locked, non-firerated doors. Specifically designed to address the most current building and life safety codes, the DSB features two independent switch circuits to release the lock. Simply touching the bar or engaging its mechanical movement will allow free egress. For indoor use only, the DSB can be installed on metal, aluminum or wood doors of all types. Meets “no special tools or knowledge” requirements.
Touch Sense Devices TSB-3 Touch Sense Bar The Touch Sense Bar is for use on magnetically locked, non-fire-rated doors. Touching the bar, even through light gloves or clothing, trips an electronic sensor which releases the lock. For indoor use only, the TSB-3 can be installed on metal, aluminum or wood frame doors of all types. Meets “no special tools or knowledge” code requirements.
Touch Sense Devices TSH Touch Sense Handle Sized to cover up existing mounting holes, the TSH is used for standard pulls on aluminum doors. It is employed to open inswinging doors or as an alternate push-open device for inswinging and outswinging doors, providing a different look on aluminum frame glass doors. For indoor use only.
Touch Sense Devices SP-1 Touch Sense Plate The SP-1 uses patented touch sensing technology to create a push plate with no moving parts. For indoor use only, the unit is oversized so that it can be mounted over a single gang cutout. A three part vinyl decal is included and a red LED is incorporated into the backbox.
Push Buttons and Keyswitches LED Color LED Color SPDT SPDT DPDT DPDT DPST DPST Alternate Alternate Momentary Momentary Illuminated Illuminated Steel Button Steel Button Blue Button Blue Button Red Button Red Button Green Button Green Button Surface Surface Narrow Stile Narrow Stile Single Gang Single Gang Waterproof Waterproof Push Button Selection Guide PB R PBA R PB2 R PB22 R PB2E PB3 * R PB3A * R PB3AN * R PB3E * PB3ER * PB3EAR * PB3EA * PB3EAN * PB3EN * PB3N
Push Buttons and Keyswitches PB Push Buttons PB Series Part # PB PBA Description 1-1/2” Round Momentary, DPST, Illuminated 1-1/2” Round Alternate, DPST, Illuminated • Includes switchable green and red buttons • Red LED on plate • 7 Amp rated contacts • Stainless Steel single gang plate: 4.5” x 2.
Push Buttons and Keyswitches PB Push Buttons PB3N Series Part # PB3N PB3AN PB3EN PB3EAN PB3-LK Description 1” x 3/4” Rectangle Momentary, DPST, Illuminated, Narrow Stile 1” x 3/4” Rectangle Alternate, DPST, Illuminated, Narrow Stile 1” x 3/4” Rectangle Momentary, DPST, Narrow Stile 1” x 3/4” Rectangle Alternate, DPST, Narrow Stile Illumination kit for non-illuminated PB3 Series Push Buttons • Includes switchable green and red lenses • Red LED on plate where applicable • 3 Amp Rated conta
Push Buttons and Keyswitches EEB Emergency Exit Buttons Features & Benefits • EEB2 EEB3N • • • • • • • • • • Emergency Exit Buttons offer additional safety, as required by code, for possible malfunction of motion exit sensor Mounted next to door Momentarily pressing the button releases the door for 30 seconds Retriggerable Single gang or narrow stile SPST 3 Amp wet N/C contacts Operates on 12 or 24VDC (must be same voltage as the installed lock) For indoor use only EEB2 includes switchable green,
Digital Entry Systems DK-11 Digital Keypad The DK-11 is a one piece unit designed for lower security requirements. While primarily intended for indoor operation, an optional rain cover (WCC) and gasketed backbox (WBB) allow reliable use for exterior areas not exposed directly to rain or snow.
Digital Entry Systems DK-16 Digital Keypad The DK-16 is an indoor Single Gang type digital keypad system designed for medium/high security control of electric locks. It consists of two components: the keypad and the CPU board. This allows the CPU board to be mounted within the protected area for higher security. Tampering with or even destroying the keypad will not release the door. Features & Benefits • • • • • 4.5” [114mm] • • • 2.
Digital Entry Systems DK-26 Digital Keypad The DK-26 Series Keypad is a digital keypad system designed for medium/high security control of electric locks. It consists of two components: the narrow stile keypad and the CPU board. The rugged stainless steel keypad is fully weatherproof and can be mounted outdoors and in most environments.
Digital Entry Systems Digital Keypad Accessories DK Expansion Board • • • • Audit trail capability Provides another 60 user codes (for a total of 119 user codes plus the programming code and a hard code) Serial printer output Additional programmable relay and on-board real time clock and calendar DK-XB DK-16/26 Expansion Circuit Board Upgrade Kit DK26 Spy Shield • • Prevent viewing the code being entered into the DK-26 Available in both stainless and black DK-SSS DK-SBK Spy Shield fo
Digital Entry Systems SABL ® Stand Alone Battery Lock Engineered for high-traffic access control, SABL is perfect for new construction or retrofitting educational facilities, commercial buildings and hospitals. Tampering with or even destroying the keypad will not release the door.
Keyswitches MK MK2 MKA MKA2 MKAN MKAN2 MKN MKN2 MKPZ MKAPZ MKS MKS2 MKSA MKSA2 MKC MKC-KA KP1 KP1A KP1AN KP1N 46 1-800-MAGLOCK www.securitron.
Keyswitches Keyswitches/ Cylinders KP1 - Tubular Keyswitch • • • • • For less demanding applications, 2 keys included Stainless steel face plates 12/24VDC bi-color LED, tubular style keyswitches 7 Amp rated SPDT switch Momentarily turning the key changes the state of the contacts Part # KP1 KP1N KP1A KP1AN Description Tubular Keyswitch Momentary, SPDT, Single Gang Tubular Keyswitch Momentary, SPDT, Narrow Stile Tubular Keyswitch Alternate, SPDT, Single Gang Tubular Keyswitch Alternate, S
Power Supplies AC Loss and Low Battery Status Manual Reset Option 1 TP-24-2 120VAC 24VAC 1.5 AMP 1 PSP-12 120VAC 12VDC 700mA 1 PSP-12-3 120-220VAC 12VDC 3 AMP 1 PSP-24 120VAC 24VDC 350mA 1 PSP-24-1.5 120-220VAC 24VDC 1.
Power Supplies BPSS Boxed Power Supply - SOLAR Securitron’s BPSS is capable of powering most any single point access control device and fail secure lock (intermittent duty only) using sustainable solar and battery operated power. The BPSS is the only outof-the-box solution specifically designed for remote electric lock control. Select the BPSS-10 or BPSS-20 (10 or 20 charging Watts respectively) based on the solar activity in the area/region where installed.
Power Supplies BPS-12/24-1 Dual Voltage Boxed Power Supply Recommended for use with the most voltage sensitive electronic safety and security components including card readers, electric strikes, motion sensors and DC voltage cameras. Also recommended where an interface with a fire alarm system or battery backup is needed. The BPS-12/24-1 is UL Class 2 listed, allowing for wire runs without the use of conduit from power supply to door.
Power Supplies BPS, BPSH Boxed Power Supply Recommended where an interface with a fire alarm system or battery backup is needed. The BPS linear power supply delivers more current than PSPs, and all BPS models are UL Class 2 listed, allowing for wire runs without the use of conduit from power supply to door.
Power Supplies BPSM Self Monitoring Power Supply When interfacing with a fire alarm system where the system’s auxiliary relay cannot handle the full current potential of the power supply, or when monitoring power systems for AC failure or DC battery failure, the BPSM linear power supply is the right choice. The power supply status LED indicators and status output terminals combine with BPS features to offer the next stage of protection.
Power Supplies PSM Power Supply Monitor The PSM Series is for use with larger DC power supplies. They operate with all BPS supplies of 2 Amps or more and act as a power supply alarm system, monitoring all key functions and reporting any trouble. The output voltage is read to ensure it remains within tight limits for proper float charging of the battery pack.
Power Supplies PSP Plug-In DC Filtered Regulated Power Supply 12 volts at 3 Amp max. capacity (model PSP-12-3) and 24 volts at 1.5 Amp max. capacity (model PSP-24-1.5). 6 ft. output cable is included. Input voltage 120 to 220VAC. PSP’s are ideal for powering a wide range of DC devices. 1.1” [29mm] Features & Benefits 1.7” [44mm] • • • • • 4.1” [105mm] Switchmode regulated power 36 watts continuous output 6 ft. [1.
Power Supplies BACS Hard Wired AC Power Supply Intended primarily for powering CCTV cameras. BACS employs the same multiple zone concept as the BPS, including nearly identical control boards providing eight automatically breakered outputs, individual control switches and LEDs.
Power Supplies Power Supplies and Accessories TP-12-3, TP-24-2 • AC Plug-In Transformer Part # TP-12-3 TP-24-2 Description Transformer, Plug-In 12VAC - 3 Amp Transformer, Plug-In 24VAC - 1.5 Amp 3.5” [89mm] 2.75” 70mm] TP-12-3 2.
Access Control Accessories Power Transfer Devices CEPT - Concealed Electrical Power Transfer Features & Benefits • • • • • • • • • • Mortises into the edges of the door and frame Tamper resistant.
Access Control Accessories Power Transfer Devices (cont’d.) Electrical Power Transfer Features & Benefits • • • • • Installs in the door and frame edges Accepts a thick cable and protects it within a flexible steel shield Near universal device that will work on any type of door that uses butt hinges, continuous hinges or pivots Will not function on a center pivot door Manufactured by Abloy Oy for Securitron How To Order Part # EPT EPTL EL-EPT EL-EPTL 9.8” [249mm] .88” [22mm] 12.
Access Control Accessories Timers DT-7 Prime Time Digital Timer Used to turn electric locks or other security systems on and off at programmed times.
Access Control Accessories Electronics RLP - Relay Logic Pack Can be used as a DPDT latching alarm relay or for two door interlocks (mantrap). Features & Benefits • • 2” [51mm] • • • • 1” [25mm] .
Access Control Accessories Electronics (cont’d.) RB - Relay Board The RB4 board is used for interlock installations and where a basic relay board is needed.
Access Control Accessories High Security Door Position Switches MSS - Maximum Security Switches Used to provide nearly undefeatable door monitoring in the highest security areas.
Access Control Accessories Door Position Switches DPS-W, DPS-M - Door Position Switches Used to monitor the status of a door or to provide an initiate signal to Securitron’s XDT delayed exit logic timers and DPA door prop logic timers. DPS-W Concealed Door Position Switch for Wood Doors Both components require drilling a 3/4” [19mm] diameter hole in the door and frame directly opposite one another. The DPS-W style is a Normally Closed switch (SPST).
Access Control Accessories Latch Monitors LML, LMS - Latch Monitors The LM Series is designed for reporting back to an alarm system to indicate that a door is latched, thereby reducing the possibility of false alarms. Can also be used to provide an initiate signal to model XDT delayed egress logic timers.
Access Control Accessories XMS Exit Motion Sensor The XMS Passive Infrared Request to Exit Device is a motion detector specifically designed to reliably release magnetic locks. A person approaching the door is “seen” by the motion detector just before reaching the door.
Access Control Accessories FAR Fire Alarm Reset The FAR module is designed to work in conjunction with the Securitron BPS and BPSM series power supplies and a fire alarm panel (by others). Whenever the FAR receives a signal from the fire alarm it will switch off the output of the BPS/BPSM power supply. The power supply will stay in this mode until a manual reset is instituted by turning the keyswitch mounted in the face of the FAR module.
Access Control Accessories LCP Lock Control Panels The LCP Series panel is designed to operate any DC electric lock or Each LCP Series panel is constructed of control zones supplied in multiples of four. A single multi-color monitoring LED per zone displays four possible strike that operates on 12 or 24VDC (Fail Safe or Fail Secure). Other conditions of the lock: Green shows that the zone is secure, and this may be electric locks can be accommodated by adding relays.
Access Control Accessories LED Monitors and Control Stations ZLP - Zone Light Panels Provides clear visual status for up to four locks or other devices using Red and Green LEDs. Features & Benefits • • • Stainless Steel face plates Red LEDs Green LEDs How To Order Part # ZLP-1 ZLP-2 ZLP-4 Description Narrow Stile (One Red/Green LED) Single Gang (Two Red/Green LEDs) Double Gang (Four Red/Green LEDs) SLP - Switch Light Panel Used to control and monitor up to four electric locks.
Access Control Accessories ZAP Zone Annunciation Panels Each ZAP panel is constructed to monitor four to twenty-four zones in four zone increments. Each panel is ideally suited to monitor multiple exit doors (using Securitron’s XDTs or iMXDas) or other doors/gates/devices beyond the visual or audible range of staff. Simple operation - no buttons or switches to push. Typically located at a nurse’s station or central security station where an immediate indication of a zone violation needs to be annunciated.
Essential Information Why Choose A Genuine Magnalock ? The Securitron Advantages...
Essential Information Switch Selection Guide Single Pole - Single Throw Single Pole - Double Throw Switches that have one input and only one output (NO or NC) are called Single Pole - Single Throw (SPST) Switches with one input and two outputs are called Single Pole - Double Throw (SPDT) Double Pole - Single Throw Double Pole - Double Throw Switches with two inputs and only one output each (NO or NC) are called Double Pole - Single Throw (DPST) Switches with two inputs and two outputs each a
Essential Information Product Demonstration Mounts Horizontal Demo Mounts These mounts lay flat on countertops and tabletops. Each mount allows you to demonstrate a specific lock and armature function with respect to release, movement, alarm and reset. BondSTAT and DPS demo units feature the M32 Magnalock. MM15 has replacement “low tension” steel leaf springs which allow full mechanical movement of mandibles. PB3 illuminated Push Button is the standard lock release.
Product Index TERMS & CONDITIONS RETURNS: A Return Merchandise Authorization (RMA) must be obtained from SECURITRON before any merchandise can be PRICES: Prices are subject to change without notice. All shipments returned. RMAs are valid for sixty (60) days only. Returned goods will be made at prices in effect at the time of shipment. The customer are subject to a restocking charge plus an additional charge for shall also be responsible for payment of all applicable sales and/or use any damages.
Product Index HHD-62 HHD-82 HHSL-32 HHSL-62 HHSL-82 HHSR-32 HHSR-62 HHSR-82 HS-500 HT-PB2 HT-PB2E HVD-32 HVD-62 HVD-82 ICC-1 IEXDA IK IK2 IMXDA J-1055-04F KP1 KP1A KP1AN KP1N LCP LMD-1 LML-1 LML-2 LMS-1 M32 M32B M32BD M32B-SS M32D M32F M32FB M32FBD M32FD M32-SS M34R M34RB M34RBD M34RD M38 M38/68D-KIT M38D M38DL M38DLS M38DLST M38DLT M38DS M38DST M38DT M38L M38LS M38LT M38S M38ST M38T M38T-KIT M6
Product Finishes MM15 E-Mag SABL, SWB ® Brushed Stainless - Standard (US26D/626) Contents Black - Optional Polished Brass - Optional Bright Brass - Optional Brushed Chrome - Standard (US26D/626) Bright Chrome - Optional (US26/625) Oil Rubbed Bronze - Optional (US10B/613) Bright Brass - Optional (US03/605) US26D/626 US26/625 US10B/613 US03/605 US26D/626 BLACK POLISHED SATIN BRASS BRASS UnLatch, Mortise UnLatch Dress Covers Stainless - Standard Oil Rubbed Bronze - Optional (US10B/613)
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience ElectroLynx®, a system of universal Molex® plug-in connectors and standardized colorcoded wiring, makes installing electrified doorway components a snap! Pre-wired doors, frames and hardware mean thatinstallation is fool-proof and future-proof.
