User's Manual

03/31/17
Copyright © 2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Harmony Series H2 Mortise Lock
A8027G • 800-810-WIRE (9473) • www.sargentlock.com 13
1. With outside lever horizontal, insert the mounting post through outside of door and lock body.
Make certain the lever spindle is properly engaged inside the lock body (Fig. 9A).
2. On the inside of the door, insert slotted spindle into square hole of mortise lock (Fig. 9B),
with spindle slot directed away from the lock body, and aligned with the set screw hole in the
inside adapter.
3. Slide inside adapter and plate assembly over spindle and loosely secure with (2) 8-32 X 5/8”
Phillips oval head and lock washer machine screws.
NOTE: Ensure that position of set screw hole and spinsdle slot are oriented to match location of
hole in the inside lever handle.
4. Securely tighten the lock body screws.
Fig. 9B
Fig. 9A
(2)8-32 X 5/8”
Phillips Oval
Head and
Lock Washer
Machine
Screws
Mortise
Lock body
Screws
Inside of
Door
Outside of
Door
8 Outside Lever and Inside Adapter Plate Assembly Installation