User's Manual

03/31/17
Copyright © 2017, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Harmony Series H2 Mortise Lock
A8027G • 800-810-WIRE (9473) • www.sargentlock.com 15
c. Position two-wire green/yellow ground wire ring terminal (from lock body)
over hole for top
left screw (Fig. 11B, C).
d. Position green/yellow reader harness earth ground on top of two-wire
ground ring and thread both with (1) 8-32 x 3/8” Phillips flat head undercut
combo screw (Fig. 11C, D).
IMPORTANT: Note orientation of ground ring terminals in Fig. 11B-D.
e. Tighten securely.
Fig. 11B
Once wires are arranged, position controller at a rotated angle against the door,
under earth ground wire.
a. Press piece against door while turning clockwise (Fig. 11A).
b. Twist into place, perpendicular with door (Fig. 11B).
Install Controller
Inside of
Door
Rotate Clockwise
Fig. 11A
(2) 8-32 x 3/8” Phillips
Flat Head Undercut
Combo Screw
Fig. 11C
Fig. 11D