User's Manual

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

03/31/17

Harmony Series H2 Mortise Lock

A8027G • 800-810-WIRE (9473) • www.sargentlock.com16

1. Connect P3 (2-pin connector) from lock body

to J3 on module (Fig. 12).

2. Connect P4 (6-pin connector) from lock body

to J4 on module (Fig. 12).

12 Connector Attachment (Exterior PCB Assembly)

13 Install Inside Escutcheon Assembly

1. Tighten the inside escutcheon securely to the

mounting plate with the Phillips ﬂat head machine

screws provided.

Use the 8-32 x 5/8” for the top of the escutcheon

and the 8-32 x 1/4” screws for the bottom of the

escutcheon located under the turn lever (Fig. 13).

NOTE: The inside gasket (not shown) must be used

when installing Harmony in an outdoor application

(refer to previous Step 6).

2. Be sure the turn assembly is functional

and the deadbolt functions properly.

Fig. 13

8-32 X 1/4” Phillips

Flat Head Undercut

Machine Screw

8-32 X 5/8” Phillips

Flat Head Undercut

Machine Screw

Inside of Door

P4 P3