User Manual

12/15/10
1-800-810-WIRE • www.sargentlock.com • A8032D 3
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
Passport 1000 Series P1 PoE Mortise Lock
Installation Wiring
Overview
5
General Description
2
Hardware Specifications
3
• Inside lever retracts latch
• Locks furnished for 1-3/4” doors only
• Grade 1; UL Listed
• Outside lever controlled by any combination of
keypad, magnetic keypad, iCLASS, prox (prox-
imity) reader, or mechanical cylinder
• Complete locksets with on-board memory
• Magnetic swipe standard with optional 125 kHz
Proximity Reader (specify PRX-), 13.56 MHz
reader (specify IKM-), and/or keypad (specify KP-)
• ADA Compliant
• Easily retrofits existing Passport 1000 door preps
(cylindrical locks)
• Latch 1/2” standard
3/4” throw fire-rated double doors
(optional) (41- prefix)
• Guarded latch
• Outside lever is unlocked through access
control credentials only
Electronic Specifications
4
• 2,400 users per lock; 10,000 event audit trail
• Multiple time zone and holiday access scheduling
• Centralized lock management
• Real time door status monitoring
• First-In unlock configuration, either by time or by
user (selectable)
• Lock down capable
• Input Power: PoE Class 2 Device, as defined
by IEEE 802.3af, requires up to 7 watts
over structured cabling
• Uses existing Magstripe keycards (track 2)
• Magnetic Stripe Card Coercivity: HiCo (4000 Oersted) or
LoCo (300 Oersted)
• Supports HID 125 kHz prox or 13.56 MHz iCLASS
credentials (26 - 39 bit); supports CSN reads for other
common 13.56 MHz cards, including MiFare, DesFire, and
Felica
The SARGENT Passport Series v.P1 cylindrical lock is available with either an HID® Prox 125 kHz or 13.56 MHz
iCLASS® technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet) providing
access control with Magnetic swipe and optional Proximity Reader and/or Keypad, as well as detailed audit capabilities-
technology as a proven alternative to traditional access control installations. The v.P1 is a self-contained microproces-
sor-controlled access control product with non-volatile memory. It uses the existing network cable to communicate with
access control systems. The v.P1 lock holds a total of 2400 different user codes.
Using PoE technology coupled with third party software, this v.P1 online lock offers a complete, integrated
access control system.
The Passport Series v.P1 cylindrical lock may be used for both indoor and outdoor applications. A weather-
protective gasket is recommended for outdoor applications.
HID and iCLASS are registered trademarks of HID Global Corporation.
* Lockdown and real-time door
status monitoring available
only when lock is hard-powered
SARGENT Passport Series PoE
v.P1 Typical Application
LMT: Lock Management Tool
A. PoE frame harness assembly
B. PoE data hinge from McKinney
(patent pending)
C. PoE door harness* from McKinney
D. DPS: Door Position Switch
(Cylindrical and Exits only)
E. Passport Series v.P1 PoE Lock
* Door width determines length
Network Cable
Network Switch (802.3af)
Surface Mount RJ45
A
B
C
D
E
Supplied by Others
PRELIMINARY