User Manual

ML20700 PWI/PIP Series Mortise Lock
15
Copyright © 2011 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
9. Install (optional) Weatherseal Gasket:
For non-fire rated door applications, an optional gasket may be
used as a weatherseal between the escutcheon and the
outside door surface.
Peel off the adhesive backing on the gasket and
install the gasket along the edge of the outside
escutcheon assembly (Fig. 9a).
10. Install Inside Mounting Plate:
Install face plate using four
#8-32 machine screws.
IMPORTANT: For fire rated doors,
also use two #8 surface
mount screws. Correctly position
the lock body harness and ground
wire.
(2) #8 Surface Mount Screws
Required for Fire Rated Doors
(4) #8-32
Machine Scews
Outside Face of Door
Fig. 10a
Surface
Mount
Screws
Ground Wire
With Ring Terminal
TCPWI
Only
Weatherseal Gasket
Outside Escutcheon
Fig. 9a
Reader Cable
M820- iCLASS
only
Surface
Mount
Screws
Lock Cable
PRELIMINARY