User's Manual

IN100 Cylindrical Lock
15
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
a. Assemble cover by hooking top edge on inside
mounting plate.
b. Carefully press bottom of cover toward door without
pinching or damaging wires.
c. Secure cover utilizing security allen wrench (provided).
5) Installation Instructions (Continued)
12. Battery Installation
Inside
Cover
Security Allen
Screw
13. Inside Cover Installation
Fig.
12
Fig.
13
1. Place (6) “AA” alkaline batteries in the compartment, being
careful to align polarity properly (Fig. 12).
2. After batteries are installed, there is a slight delay; then red and
green flash, audible “beep” and lock motor will cycle.