User's Manual

IN100 Mortise Lock
11
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
Fig. 8a
Inside Face of Door
Step 4
Step 5
Align adjustment bolt with threaded hole in lever
Adjustment bolt needs
to be threaded in farther.
Adjustment bolt needs
to be unthreaded.
Adjustment bolt fully aligned.
Notes:
• Unthread adjustment bolt approximately four turns
for a good starting point (after being fully tightened).
• Make sure O/S lever is fully inserted into adapter
plate before aligning adjustment bolt.
STANDARD
MUSÉO
kƒ„ƒ·
Use Correct Spindle Orientation
Good Bad
Lever
Fig. 8b
5) Installation Instructions (Continued)
Inside Lever
Fig. 9a
Fig. 9b Fig. 9c
Fig. 10
Step 6
Install I/S lever with set screw: