User's Manual

IN100 Mortise Lock
8
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
RED Locking Screw
d. Push in latch while holding screw driver
behind latch tail (Fig. 3)
Note: Push in latch until catch plate is no
longer depressed (Fig. 4)
e. Rotate lock front to match bevel of door
as shown (Fig. 5)
Catch Plate
MAKE SURE CATCH PLATE IS
EVEN W/ TOP SURFACE
WARNING:
LOCK-IN CAN
OCCUR IF LATCH
IS NOT PROPERLY
INSTALLED
5) Installation Instructions (Continued)
4. Lock Handing Instructions
a. Move the Red locking screw to side of lock-body
being locked (Fig. 4a)
b. Push in latch then depress catch plate with screw
driver (Fig. 4a)
c. Pull latch out of lock-body and turn latch over (Fig. 4b)
Fig. 4a
Fig. 4b
Fig. 4d
Fig. 4c
Fig. 4e