User Manual

Table Of Contents

12 1-800-810-WIRE • www.sargentlock.com • A7786E

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

01/29/11

Profile Series v.S2 WiFi Mortise Lock

1. Slide lever handle onto spindle

until fully seated (Fig. 10A).

2. Tighten the set screw securely with

1/8" hex wrench.

Step #10 – Install Inside Lever

Step #9 – Install Inside Escutcheon

1. Gently fold the excess ribbon connector and ground

wire into the top hole, JST connectors and ground

wire into offset middle hole, and mortise and AX/DPS

wires into bottom hole, being careful not to pinch

wires (Fig. 9A).

2. Insert (2) #8-32 x 1-1/4" screws through inside

escutcheon and thread into outside escutcheon.

Straighten escutcheons and tighten securely.

Inside of Door

Fig. 10A

Spindle

Set Screw

Inside Lever

Inside of Door

Fig. 9A