User Manual

Table Of Contents

01/29/11

1-800-810-WIRE • www.sargentlock.com • A7786E 13

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

Profile Series v.S2 WiFi Mortise Lock

Step #12 – Attach Front Plate

Attach front plate with (2) ﬂat head screws.

Step #11 – Install and Secure Cylinder

1. Slide cylinder through the spring and rosette/collar

and screw into lockbody, rotating the cylinder

clockwise (Fig. 11A).

Cylinder should be ﬂush with escutcheon.

Note: The 43 cylinder may be used when installing

this product with or without a gasket.

Note: SARGENT logo must be horizontal and

on the top of the cylinder (Fig. 11B).

2. Secure the cylinder by tightening cylinder clamp

screw located above the deadbolt using #2

Phillips screwdriver (Fig. 11C).

3. Using the key, test cylinder functions:

• 8278 Function: Key retracts latch.

• 8276 Function: Key retracts latch and projects

and retracts deadbolt.

Fig. 11B

Position cylinder so that the

SARGENT logo is right-side up.

Correct Incorrect

Fig. 11A

Outside of Door

Key

Type 43 Cylinder

Fig. 12A

Outside of Door

Front Plate

(2) Flat Head Screws

Lock body Screws

Cylinder Clamp Screw

#2 Phillips

Screwdriver

Outside of Door

Fig. 11C