User Manual

ManualsBrandsASSA ABLOY ManualsElectronicsMicroprocessor Controlled Networked Lock

Table Of Contents

10 1-800-810-WIRE • www.sargentlock.com • A8122B

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

8/050/12

IN100 Mortise Lock

Fig. 8A

Fig. 8B

Set Screw

Inside Lever

Spindle

Rose

1. Rotate the inside rose ﬁrst counter clock

wise to seat the threads then clockwise

to securely tighten.

2. Slide lever handle onto spindle until fully

seated. Be sure handle is horizontal and

facing the hinge side of the door. Push

lever onto spindle so minimum gap

is visible.

3. Tighten the set screw securely with

a T20 Torx.

4. Before closing the door, test that the

lever is functional and ensure

smooth operation of the

latchbolt.

Install Inside Rose and Inside Lever Assembly

Inside of Door

Fig. 9B

1. Slide the spring and the rosette onto the cylinder.

2. Rotate the cylinder into cylinder hole with ﬁngers.

3. Insert key 75% of the way and utilize the key to rotate the cylinder into the rest of the cylinder hole.

Note: Do not attempt to tighten all the way.

4. Verify the orientation of the cylinder has the Sargent logo as depicted in Fig. 9A.

5. Hand tighten the cylinder clamp screw with Phillips screwdriver

to prevent unscrewing of the cylinder (Fig 9C).

6. Test cylinder function:

• Key retracts latchbolt and deadbolt

(7976 function). Key retracts latchbolt

(7978 function).

• Cylinder not present for 7977

and 7979 functions.

NOTE: Use lever handle holes

to manipulate lock to ease

thread engagement of cylinder.

Fig. 9C

Outside of Door

IMPORTANT: Position cylinder so that the

SARGENT logo is positioned correctly.

Correct Incorrect

Fig. 9A

9 Outside Cylinder Installation

Cylinder

Clamp-

Screw

Phillips

Screwdriver

Rosette

Spring

Cylinder

Preliminary