User Manual

Table Of Contents

8 1-800-810-WIRE • www.sargentlock.com • A8122B

Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.

8/050/12

IN100 Mortise Lock

Weather Conduit Installation (Optional P/N 52-2847)

Fig. 4A

Install weather conduit on NON FIRE-RATED metal exterior doors only (Fig. 4A).

1. Carefully insert the weather conduit into the ribbon cable hole

from the outside of the door.

2. Place the O-ring around the weather conduit on the inside and

up against the door (Fig. 4B).

Fig. 4B

O-Ring

Inside of Door

5 Install Lock body

1. Feed the wire harness through the mortise pocket

and inside preparation hole as depicted in Fig. 5.

2. Carefully push the lock body into the pocket while lightly

applying tension to the wire harness.

Note: Do not pull the lock into the pocket with the

harness alone. Ensure that the wire harness is not

pinched between the lock and the mortise pocket.

3. Insert (2) #12-24 screws into the lock body

and tighten with a screw driver.

Mortise

Connectors

Fig. 5

Inside of Door

(2) #12-24 screws

Scan this Microsoft® Tag using your mobile phone to

see a video of this installation step. The Microsoft Tag

mobile app is required to scan the Tag. Download the

free mobile app at http://gettag.mobi

Preliminary