Installation manual

Access Control Catalog - June 2004

Simplex

LP1000Series

Exit Device Operator

Lock Operation

Combination code: One code per lock made of any combination of one to five numbers (pressed individually

or simultaneously)

Code: Thousands of possible combinations

Emergency access: Mechanical Key override

Certification and Testing

Accessibility standard: Americans with Disabilities Act (ADA) for lever equipped lock

Fire rating: Three-hour UL/ULC rating for “A” label doors

Environmental Highly weather resistant

operating conditions:

Durability:

Conforms to ANSI 156.2, Grade 1

Warranty: 1 year

NOTE: Exit Device may be “Dogged” without affecting the LP1000.

Mechanical Features

Construction: Heavy-duty cylindrical lock housing; all metal; cast front housing; brass mounting plate; fixed cast ADA-

compliant lever

Installation: Recessed through bolts may be required. Exit Device preparation.

Door handing: Factory-handed; not field reversible

Numeric pushbuttons: Vandal resistant, 5 button, anodized aluminum, mechanical

Weight: 8 lbs. (3.6 kg)

Strike: Not supplied. (Comes with Exit Device)

Latch & Exit Device: Not supplied

Key override: Compatible with major manufacturers of removable cores: ASSA, Best and Compatible (6 or 7-pin length),

Corbin / Russwin, Medeco / Yale (6-pin length), Sargent, and Schlage

Exit Device • Von Duprin Exit Only (EO) or Exit Only Fire (EOF) 22, 88 NL, 98, 99, 9857, 9957

compatibility: • Dorma 9100, 9300, 9400

• Detex Advantex Series 10, 20, 21, 40, 50, 51

• Monarch XX-R*, FXX-R, 18-R*, F-18-R*, XX-V*, F-XX-V*, 18-V*, F-18-V* (*Requires special

k-hub adapter)

• Cannot be used with mortise design or most vertical rod Exit Devices

Tailpiece: 2

⁄4" (70 mm) tailpiece for Exit Device operation from outside

Exit Device hub Up to 60˚, counterclockwise for left hand & clockwise for right hand

rotation:

Door thickness:

⁄8" (35 mm) to 2

⁄4" (57 mm); optional 4" (102 mm)

Finishes: Satin Chrome 26D (626), Bright Chrome 026 (625)

Control: Combination change tool

Minimum stile 5" (127 mm)

requirement: