User Manual

17
An ASSA ABLOY Group brand
P/N AYRT-220-INST-FUL Rev A
User PIN Codes can only be programmed through the Master PIN Code*.
1. Touch the screen with the back of your hand or fingers to activate
.
2. Enter the 4-8 digit Master PIN code followed by the
key.
Lock Response: “Menu mode, enter number, press the
key to continue.”
3. Enter “2” followed by the
key.
4. Enter “1” followed by the
key.
5. Enter the User Number to be registered (1-25) followed by the
key.
6. Enter a 4-8 digit PIN code for the User number followed by the
key.
7.
To continue adding users press the key.
8. Press the
key to complete the process and conclude the programming session.
Set Up User PIN Codes
Note: When registering User codes, the code must be entered within 20 seconds or
time expires, Lock Response: “Time expired”, no codes are registered and the process
must be re-started.
3
Press the key
to confirm the
selection.
Enter PIN code.
2 1
Touch lock with
back of hand or
fingers to activate.
PIN code structure
Maximum number of user codes is 250 with Network Module; without Network Module,
maximum is 25 user codes.
Open Door with PIN Code
*Master PIN code must be registered before User codes can be added.