User Manual

23
An ASSA ABLOY Group brand
P/N AYRT-220-INST-FUL Rev A
2. Remove the inside lever handle:
A. Insert allen wrench (included) in set screw on side of lever
(towards edge of door); turn clockwise to loosen lever handle.
B. Pull to remove lever handle.
A
A. Remove and switch handles (inside to outside, outside to inside).
B. Remove cylinder from outside lever handle.
C. Insert cylinder in "new" outside lever (Fig. 3A).
D. Push handle in allowing holes for set screw to align.
E. Insert set screw and tighten by turning set screw counter-clockwise.
3. Change the lever handing:
Incorrect
NOTE: "Swoop" of lever handle
must be oriented in upward direction
as shown in Fig. 3A
Correct
Figure 3A
B
Figure 3B