Datasheet

Part Number:
CW1300-1
CW1300-1
Tilt Switch / Motion Sensor
SPECIFICATIONS
Contact Form/Style Dependent on mounting
Switching Voltage Max. Vac 60
Switching Current Max. A 0.25
Switching Capacity Max. VA 3
Contact Resistance Max. Ohms 30 Ohms measured 10 deg. below horizontal at 5VDC.
Make Angle Max. Deg.° 10 below horizontal
Break Angle Max. Deg.° 10 above horizontal
Differential Angle Max. Deg.° 15
Operating Temperature Deg.°C -37° C to 100° C
Case Material Tin plated
Features Mercury Free, Patented Design, Hermetically sealed and Inert gas filled
As part of the company policy of continued product improvement, specifications may change without notice. Our sales office will be
pleased to help you with the latest information on this product range and the details of our full design and manufacturing service.
All products are supplied to our standard conditions of sale unless otherwise agreed in writing.
©2008 Copyright Comus International Inc.
454 Allwood Rd, Clifton, NJ 07012, USA.
Phone: [phone] Fax: [phone] Website: www.comus-intl.com
UK: [phone] - Belgium: + 32 (0)12 390400 - France: + 33 (0) 1 43 96 86 10
PICTURE DIMENSIONS
2x0.5Ø
(.020)
2.9
(.115)
10.2
(.400)
22.1
(.870)
4.7Ø
(.185)
5.94Ø
(.234)
Drawings not to scale
All dimensions in mm(inches) nominal
REV. NO. REVISION NOTE DATE SIGNATURE
E Datasheet Redesign May 28, 2008 LG
Take a look at our variety of products
Float Switches Acceleration /
Shock Switches
Movement
Sensors
Tilt / Tip Switches Reed Relays Solid State
Relays
High Breakdown
Switches
Reed Switches
Magnets
Electronic Tilt /
Tip Over
Low Cost - Non
Mercury Switches
Rubber Keymats -
Silicone Rubber
Product Data Sheet