User`s guide

How do I set up Mercury’s remote controls?

Click the

Setup

button in the Mercury Control

Panel (see page 11), then click on the

Remote Control

tab.

Click the

Add

button to add a room. Type a

name for the room in the small window that

opens.

Highlight the room name at the left and click

the

Add Device

button.

Before you use the Mercury Remote Control for the first time, you will need to set up the remote control

codes for the particular television, VCR, cable system, DVD player, or satellite system you have. You can set

up multiple rooms, each with different devices.

In the window that opens, select a device type

from the left column, then choose the manu-

facturer of that device from the second column.

Aim the infrared transmitter (on the top of the

Mercury) at the device and click the

Try Code

button. The correct code will turn the device on

or off. If the first code does not work, press the

Try Next Code

button, testing each code

sequentially until you find the one that turns

your device on or off.