WIRELESS TV STREAMING BOX Manual DN-70310
Table of Contents CHAPTER 1: PRODUCT INTRODUCTION ................................................................................. 3 1-1 Package Contents .......................................................................................................... 3 (1) PC2TV ...................................................................................................................... 4 (2) Media Streaming .................................................................................................
CHAPTER 1: PRODUCT INTRODUCTION Thank you for choosing DIGITUS Wireless HDMI Receiver Box DN-70310. Please follow the manual for its use.
1-2 Hardware Recommendation (1) PC2TV DN-70310 is designed to able to stream screen capture from PC (Windows 7 /Window 8/ Win 8.1) & Mac (over 10.6) to your HDTV. PC or Notebook CPU: Core 2 Duo 2.0 GHz or better Memory: 2.0 GB or better Network: 802.11g/n Wi-Fi and/or 100/1000 Mbps Ethernet (2) Media Streaming Stream photo/music/video from your PC, smart phone or laptop or play back video/Music/photo form USB up to 1080p HD. PC or Notebook CPU: 1.6 GHz or better Memory: 1.
(3) Screen Mirroring for Android Screen mirroring from Miracast-ready smart phone/tablet/NB up to 1080p HD through Miracast technology. (4) i-Play Stream video/photo contents from iPhone or iPad to your TV by Airplay feature. 1-3 Highlights DN-70310 enables you to mirror whatever is displayed on Windows PC/laptop, Mac, smart phone & tablet on your HDTV, wirelessly, up to 1080p video resolution without the hassle of using HDMI cable. Major features: 802.
1-4 Hardware Setup/Installation (1) Connect your device (2) Connect power and push power button to turn on DN-70310. After few seconds, when you see the below screen: the device is assigned an IP address, the system is in standby mode and ready to do file streaming or screen mirroring from your device.
(3) If your device is already connected to the router, press the switch button to disconnect with router, press again to connect.
CHAPTER 2: DESCRIPTION OF FUNCTIONS DN-70310 is a highly integrated all-in-one receiver, featuring instant and direct peer-to-peer connection with no need to press switch button between different functions. Mirroring Mirroring: Screen mirroring from Android smart phones, or tablet PCs through Wireless Mirroring technology.
2-1-1-1 Launching ScreenShare Please follow the steps below to run ScreenShare for Windows OS after DN-70310 is booted up with the following screen displayed on HDMI TV or monitor. (1) Search and find the device’s SSID (DN-70310) in Wireless list on your notebook via WiFi.
(2) Connect to this device SSID. DN-70310 123 DN-70310 123 (3) Double click the ScreenShare icon from your desktop. (4) ScreenShare will auto detect ‘Server IP’, please input login code as shown on instruction page. DN-70310 123 (5) If login code is correct, application software will appear.
2-1-1-2 User Interface of ScreenShare Main functions 6 1 2 3 4 5 No Name Function Description 1 Play Start / pause presentation. When pausing a progressing presentation, the displaying image will freeze. 2 Stop Stop a progressing presentation and go back to instruction page. 3 Menu Access menu list. 4 Login code Show the application login code. 5 Volume Control the slidebar to change the volume. Press the icon to mute.
Menu You can also click ‘Menu’ button to access menu list. (1) Display Mode No Name Function Description 1 Main Display Mirror NB/PC display to the Rx monitor. 2 Extend Display Mirror your extend display to the Rx monitor.
You can decide the region you want to zoom in and display to the monitor. Step 1. Choose Zoom In→Specific Area Step 2. Now you can decide the region you want to display to the monitor.(You can slide the frame and also adjust it size.)After finish, just double click the right button of mouse and then you can enjoy this function! Step 3. After finish, just press ”ESC” and you will back to main display function.
(3) Streaming Mode (This function only can be used when mirroring) No Name Function Description 1 Presentation Mode Default is presentation mode. 2 Video Mode If play video the performance is not good, select this will be better. (4) HDMI Resolution You can change HDMI output resolution.
(5) Aspect Ratio You can change the Rx monitor ratio. “Auto” means the ratio will follow the display source. “Pan Scan 4:3” means adjust widescreen images so that they can be shown within the proportions of a 4:3. “Letter Box 4:3 ”means adjust widescreen images so that they can be shown within the a fully 4:3. The resulting image has mattes (black bars) left and right it.
No Name Function Description 1 Auto Adjust Resolution Let your pc/notebook resolution changed by Rx monitor resolution. 2 Auto Save After reboot this application, all of the settings will be saved. (7) Exit Exit from ScreenShare application, and go back to instruction page. 2-1-2 Basic Usage of application software for Mac (Option) You can install ScreenShare application from the CD onto the Mac devices. (1) Click twice on the ScreenShare.pkg file to start installing. (2) Start Installing.
You have finished installing the software。 2-1-2-1 Launching ScreenShare Please follow the steps below to run ScreenShare for Mac OS after DN-70310 is booted up with the following screen displayed on HDMI TV or monitor.
(1) Search and connect to the device’s SSID (DN-70310) on the WiFi list on your notebook.
(3) Applications -> Hivision -> ViVA ScreenShare Press ViVA ScreenShare to start. (4) ScreenShare will auto detect ‘Server IP’, please input login code as shown on instruction page.
DN-70310 123 9671 (5) If login code is correct, application software will appear. 2-1-2-2 User Interface of ScreenShare Main fuctions No Name Function Description 1 Play Start / pause presentation. 2 Stop Stop a progressing presentation and go back to instruction page.
3 Memu Access menu list. 4 Minimize/Close Minimize and close the Application Software window. Menu You can also click ‘Menu’ button to access menu list. (1) Display Mode No Name Function Description 1 Main Display Mirror NB/PC display to the Rx monitor. 2 Extend Display Mirror your extend display to the Rx monitor. (2) ZoomIn (This function only can be used when “Main Display” running) You can decide the region you want to zoom in and display to the monitor.
(3) Streaming Mode (This function only can be used when mirroring) No Name Function Description 1 Presentation Mode Default is presentation mode. 2 Video Mode If play video the performance is not good, select this will be better. (4) Aspect Ratio You can change the Rx monitor ratio. Default is “Auto”, means the ratio will follow the display source.
(5) HDMI Resolution You can change HDMI output resolution.
(6) Auto Adjust Resolution Let your pc/notebook resolution changed by Rx monitor resolution. (7) Auto Save After reboot this application, all of the settings will be saved.
(8) Information Displays application information, like Adapter name or IP Address and Version number. (9) Exit Exit from ScreenShare application, and go back to instruction page.
2-2 Using DN-70310 on Android devices via Mirroring 2-2-1 Launching Android mirroring To enable Android mirroring, your smart phone must support this feature. Please refer to Appendix for the compatible list of smart phones. Basic Usage The setup location of Mirroring connection may be different between different brands of smartphone and tablet PC. The setup page is usually in “Wi-Fi” => “More setting” or in “Display setting”. The name normally is called “Screen Mirror”, “Cast Screen”, etc.
Type2: Please go to “Settings” -> “Xperia” =>“Screen mirroring” => “Turn on Screen mirroring”. Your phone will scan the streaming box, and it will show the SSID of the box. Choose the SSID, mirroring will begin while your phone connect to streaming box successfully. DN-70310 123 Type3: Please choose “Settings” -> “Media Output”. The phone will automatically scan the streaming box, and show the SSID. Choose the SSID which you find on the TV, and your phone will connect to the box automatically.
2-3 Using DN-70310 on i-Play (1) Search and connect the device’s SSID (DN-70310) on the WiFi list on your iPhone/iPad first. DN-70310 (2) Run “Photos” (3) Choose the photos or videos witch you want to share. (4) Press the “Airplay” to show the device list.
(5) Select DN-70310 as your Airplay receiver box, and the photo will be shown on the bigger screen of the HDMI TV or monitor. DN-70310 2.4 How to Setup Airfun for media sharing Airfun Airfun Media Streaming 1. Please scan the QR code on the screen or go to the Google play/APP store to download AirFun APP. 2. Then connect to DN-70310 on your Wi-Fi list from your smart devices. DN-70310 123 3. Press the Airfun icon on your screen. 4.
DN-70310 123 5. Select this icon to choose the file type which you want to share and present on the HDMI screen. 2.4.1 Basic Usage of AIRFUN Utility for Windows software 1. You can install Airfun application in the CD ROM.
2. Double click the AIRFUN icon from your desktop. 3. The Airfun will start to search device. 4. Then you should be able to see your PC screen on the TV now. 5. You can drag the video/photo/music file to Airfun main menu directly. For video files, please drag files to the right folder.
6. For photo/music files, please drag files to the left folder. 2-4-2 Advanced Setup Please connect WiFi to DN-70310 first, and run the Airfun APP, you should be able to see the UI bellow. Devise SSID DN-70310 Now you can do basic settings, such as change the SSID, connect to router, or choose the language.
If you need advanced settings, please go to the remote control page below, and choose next page, as marked in red. Press the gear icon (marked in red), to enter setup.
In the setup page, you can use the virtual remote controller to change the setting. - Select “left/right=> OK” to enter the setting page for Network / Audio / Video / System. - Select “Return” to go to the previous page or standby screen.
2-4-3-1 Network Setting DN-70310 Wired Connection Item Description DHCP IP (AUTO) DN-70310 will obtain an IP address from DHCP server automatically. Fixed IP (Manual) Set DN-70310 IP address manually. Fill the fields below to setup IP address. Device Name Item Description Device Name (SSID) Change the Device Name(SSID). Default is “DN-70310”. WiFi Connection If you are setting for the first time, you will see below screen, click “on”.
Then there will show the Wireless AP list on the screen. Please choose the AP you want to connect. The function is to bridge to Internet via another Wireless AP. Digitus PMM Digitus test AP DN-70590 When it’s successfully connected, standby screen will show router name at the right bottom corner. AP: Digitus PMM SSID: DN-70310 If you wish to disconnect with router, click “off” on the WiFi connection page. More information, please reference Chapter 3.
Password If Wireless Security is enables, you can set a wireless password. Radio Band Set the Radio band to 2.4GHz or 5GHz. Please confirm your PC/NB support 5GHz before you set the radio band to 5GHz 5G Preferred Channel If the Radio band is 5GHz now, you can change the 5G frequency. Default channel is 36,40.
2-4-3-3 Video Setting You can adjust Aspect Ratio, TV out video format, and other video setting in the video setup page. 2-4-3-4 System Setting You can set the OSD language, reset to Factory default, check the firmware version, and do the firmware upgrade in the system setup page.
CHAPTER 3: ROUTER APPLICATION By using a router, it provides a solution for users who are unable to access online contents while their exist Wi-Fi is occupied to connect to DN-70310. DN-70310 allows two methods ,Wi-Fi, or Ethernet LAN cable to connect to your router, giving the flexibility to Internet connection whichever method is most convenient. While connecting with a router, users will no longer find the original SSID on WiFi list.
(2) Ethernet LAN connection: DN-70310 Step1: Connect an Ethernet cable from the LAN port on DN-70310 to an AP router’s LAN port. Step2: DN-70310 will auto detect LAN connection. Once it’s successfully connected, the UI will change as below: ** Please note! DN-70310 must connect to AP router and can’t connect to WAN directly.
APPENDEX B: Compatible list for Android mirroring Module Google Nexus 4 Google Nexus 5 Google Nexus 7 II HTC New One HTC One mini HTC Butterfly HTC Butterfly S LG Optimus G L180L LG Optimus G L-E973 LG Optimus G L-01E Samsung Galaxy S3 Samsung Galaxy S4 Samsung Galaxy Note2 Samsung Galaxy Note3 Samsung Note 10.1 Samsung Galaxy Tab3 8.0 Samsung Galaxy Tab 10.
