G660 DashPro2Channel Quick Start Guide
CarCam details Product Components 12 Mount (external GPS) 11 10 DC Power Input Video Input 9 8 Camera Lens 1 USB 2 VIDEO Output 7 Micro SD Slot 6 Record 3 Speaker 4 Cancel 5 LED ※ The actual product is subject to change without prior notice for performance and quality improvements.
Installation Caution upon Installation • Please don’t move CarCam once installed. Change the double sided tape if CarCam need to be re-attached. • Do not install or use CarCam outside of the vehicle. Make sure to check local traffic laws and regulations before using. Attach CarCam in a place where the driver’s view is not blocked.
Installation Connecting CarCam to the vehicle’s windshield Connect the CarCam to the mount Connect power cable to CarCam Insert Micro SD card Organize power cable, connect cigarette lighter socket Place the groove at the top side of the main unit against the groove area on the mount and push until a “click” sound is heard. When inserting memory cards, check to see that the correct side of the card is facing up before inserting into the slot.
