Operating instructions

• Using the VSS (Virtual Surround Sound) function gives the sound a sense of expansion and allows you to
achieve surround effects even when only front speakers (left and right) are used For discs with surround
signals, the VSS function not only gives the sound expans on, it also makes it seem as if sound is coming
from the sides, even though there are no speakers there
Dubng playback, press the VSS button on the remote Rerloecontlo Jni
control unit¸
NOTES:
• This ful]ction only _vorks witl] DVDs co[_tairdng two or rTlore Dst r eA
channels of Dolby Digital signals
• The VSS function does not work at the time of mukEchannel setting
Set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "2
CHANNEL"
• Note that for some discs the effect will be weak or there will be no
effect
• For some discs the sound may be distorted If so turn the VSS
function off
• Turn off other surround functions (the TV's surround mode, etc) Lisenirgposton
• The effect is best when listening at a distance from the TV equal to
3 to 4 times the distance of the left and right speakers (distance
A)
During playback, press the PAGE + or PAGE - butto[i on the
remote controJ unit
• For DVD audio discs with still images, the desired image
can be selected Re _>tecol _/Iunt
• On some dscs the image cannot be selected due to the
intentions of the discs' producers
I _ i II i I •
SEARCHr,1,__E
In the stop mode, press the SEARCH MODE button on _ _ Rer_>te/o1_/Iunt
1 the remote control unit to set the search mode to
"GROUP" _'_\
G@G
Use the number buttons to input the bonus group (_) _ _ Re _>tecol_)lurlt
2 number
Use the number buttons on the remote control unit to
input the password (4 digits), then press the ENTER _-_
button Re _>te col _/I unt
\
• Playback starts from the first track in the specified I \
group _"
• In some cases the password must be nput at the menu screen In these cases, follow the instructions on
the screen
• Once the password is input, the disc can be played as many times as you want until t is removed
• If you make a mistake when inputt ng the password, press the CLEAR button on the remote control unit
[] USING THE PURE DIRECT MODE
• hi the pure direct mode, O_lly analog audio signals (no video signals, etc) are output, thereby achieving high
quality sound
]
D- 10 .......
4
2 m
3
Press the PD MEMORY button on the remote
control unit
• The output status of the video s gnals, etc, can be
stored at MODE 1 and MODE 2 as desired
Use the • and • cursor buttons to select the mode,
then press the ENTER button
DIGITAL OUTPUT
ON: Digtal audio signals are output
OFF: Digtal audio signals are not output
VIDEO OUT
ON: Video signals are output
OFF: Video signals are not output
DISPLAY
ON: It is indicate in Display of the main unit
OFF: It is not indicate in Display of the main unit
Press the PD MEMORY button on the remote
control unit
• All of the settings are stored in the memory
Switch the PURE DIRECT switch on the main unit
OFF: All signals are output normally
MODE 1:The settings stored for MODE 1 are
used
The factory default settings are:
r'DIGITAL OUT": "ON"
r'VIDEO OUT": "ON"
"DISPLAY": "ON"
MODE 2: The settings stored for MODE 2 are
used
The factory default settings are:
r'DIGITAL OUT": "ON"
r'VIDEQ OUT": "ON"
"DISPLAY": "ON"
%
Remo_e cor_tro! unit
R ............... ,u ]it _8%
%
Remo_e cor_tro! unit
PDr_E_Y
Remo_e cormo! uni_
PU_ED,RECT
23