Operating Instructions Sophos UTM 425
Foreword We are pleased to welcome you as a new customer of our Sophos UTM hardware appliances.
CE Labeling, FCC and Approvals The UTM 425 appliance complies with FCC Class A, CE, C-Tick, VCCI and UL. Important Note: For computer systems to remain CE and FCC compliant, only CE and FCC compliant parts may be used. Maintaining CE and FCC compliance also requires proper cable and cabling techniques. Operating Elements and Connections Sophos UTM 425 (rev.
LCD and Control Keys The Sophos UTM 425 has an LCD and an operating unit with four membrane keys. In the LCD, 16 characters per line can be displayed. The display contains in three cycling views information on the hardware and specific system states. *** Astaro *** Security Gateway After the security appliance has booted this message is displayed. ASG ver. 8.000 CPU i686 1001 MB UTM version CPU type and RAM size Busy 27.0% Load 0.0 10 days 01:43:17 Load 0.
Starting factory reset 1. Press the Enter key. 2. Press the ▼ key. The following message will be displayed: All data erased 3. Press the Enter key. The following message will be displayed: Are you sure? With the up/down keys you can select Yes (y) or No (n). 4. Press the Enter key to confirm your settings. The factory reset action will now start. Starting rebooting machine 1. Press the Enter key. 2. Press twice on the ▼ key. The following message will be displayed: Rebooting 3. Press the Enter key.
Mounting Instructions The Sophos UTM 425 appliance is designed for use in racks. Please consider the following security tips: Important Note: The appliance is designed for use in rack systems. Functional reliability outside of a rack cannot be guaranteed. Warnings and Precautions The appliance can be operated safely if you observe the following notes and the notes on the appliance itself.
ÌÌ C ircuit overloading: Consideration should be given to the connection of the equipment to the power supply circuitry and the effect that any possible overloading of circuits might have on overcurrent protection and power supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. ÌÌ R eliable ground: Reliable grounding must be maintained at all times. To ensure this, the rack itself should be grounded.
Connection and Configuration How to connect the appliance is described in the Hardware Quick Start Guide. For configuration you can follow the initial setup wizard described in the WebAdmin Quick Start Guide or cancel it and perform a manual setup (see the Sophos UTM Administration Guide). SFP GBIC Port The Sophos UTM 425 is equipped with SFP GBIC ports.
UTM 425 Operating Instructions Serial Console You can connect a serial console to the COM port of the Sophos UTM hardware appliances. You can use, for instance, the Hyperterminal terminal program included with most versions of Microsoft Windows to log on to the appliance console. Use the provided RJ45 to DB9 adapter cable to connect the console to your hardware appliance. The required connection settings are: Bits per second: 38,400, Data bits: 8, Parity: N (none), Stop bits: 1.