Quick Start Guide

ManualsBrandsAstatic ManualsPro AudioVariable Polar Pattern Microphone with Boom

1600VP/1700VP/1800VP

Continuously-variable Pattern Condenser Microphone System with Remote Polar Control

Description

he 1600VP / 1700VP / 1800VP is a continuously-variable pattern

condenser microphone system with remote polar control (patent

pending). The variable polar pattern with remote control allows the

user to precisely adjust the shape of the pick-up pattern for best

performance from a remote location. Utilizing a two-conductor shielded

cable (maximum length 2,000 feet) between the microphone head and

the pattern-control box (VPC-1), the user can adjust the polar pattern

in real time without changing capsules, microphone positions, or

inducing noise in the audio chain.

Special attention has been given to the frequency response and

sensitivity of the microphone system while utilizing the variable-pattern

control to precisely alter the shape of the pick-up pattern. The large-

diameter, low-noise elements produce a frequency response of 40Hz

to 20KHz with a selectable, recessed 80Hz, 12dB/octave high-pass

filter that removes unwanted low-frequency energy when engaged.

The filter control is conveniently located on the control box.

The microphone head is made of commercial grade aluminum, the

control box is made of hardened steel, both manufactured in the USA.

The microphone head and box are powder coated matte black for an unobtrusive yet stylish appearance. Up to six con-

trol boxes can be mounted in one rack unit shelf - Astatic RU1. The polar- pattern dial is positioned for easy adjustment

”on the fly” and can be secured with a single “Flat Style” blank panel when rack mounted.

The 1600VP / 1700VP / 1800VP is designed to resist interference from devices such as cell phones, two-way communi-

cation devices and lighting apparatus. Utilizing our RF Resistant Architecture, the 1600VP / 1700VP / 1800VP meets the

stringent RF standards set by the European Union (see the specification section for more information).

The system comes complete with microphone head, VPC-1 control box, 30' (9.1m) of two-conductor shielded cable

terminated with a TA3F-type connector and 3-pin XLRM -type connector. Also included with the microphone system

is a 3-pin XLRF -type connector on a stainless steel duplex wall plate. Choose the appropriate model number for your

specific application:

Choose the 1600VP when a suspended system is required. System includes a counter poise string, exclusive

articulating steel hanger, anti-twist thread and rods, 30' of cable, and XLRF -type wall plate.

Choose the 1700VP when a floor stand version is needed. System includes the MB -1; a feather light 56" boom

and exclusive Clutch Rotation System, this boom can be mounted on any standard microphone tripod or base stand.

Choose the 1800VP when a podium version is required. System includes the MB-18; an 18" miniature dual-flex

gooseneck with TA3F-type and XLRM-type connectors.

CAD Audio

www.cadaudio.com

Part No. 46873-92-01 July2010

Two-Year Limited Warranty

CAD Audio warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs

CAD Audio will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.

This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to CAD Audio’s instructions or unauthorized repair. All implied warranties,

merchantability, or fitness for a particular purpose is hereby disclaimed and CAD Audio hereby disclaims liability for incidental, special or consequential damages resulting from the use or

unavailability of this product.

This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential

damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.

Note: No other warranty, written or oral is authorized by CAD Audio.

4 of 4 1

of 4

Using the Wall Plate

1. At

tach the upper-support arm

to the wall plate.

2. Run provided thread to

counterbalance support

(small loop on support).

3. The microphone head can be

twisted in the hanger to help

correct for rotation if the

thread is not used.

Using the Articulating Steel Hanger

1. Insert the microphone head into the large

hoop of the hanger.

2. Line up the microphone head screw hole

and insert security screw.

3. Run the provided cable through the hanging

hoop (small hoop).

4. Wrap the cable around the underside of the

pivot joint.

5. Adjust microphone angle and tighten

thumb screw.

1700VP

1800VP

1600VP

For warranty issues visit cadaudio.com and select the support tab.

Summary of content (2 pages)

PAGE 1
600VP/1700VP/1800VP Continuously-variable Pattern Condenser Microphone System with Remote Polar Control Description The 1600VP / 1700VP / 1800VP is a continuously-variable pattern condenser microphone system with remote polar control (patent pending). The variable polar pattern with remote control allows the user to precisely adjust the shape of the pick-up pattern for best performance from a remote location.
PAGE 2
1600VP/1700VP/1800VP Continuously-variable Pattern Condenser Microphone System with Remote Polar Control Specifications† Omnidirectional Final Connections Operating Principle..............................................Condenser Polar Pattern ........................................Continuously-variable Frequency Response ......................................40Hz - 20KHz Sensitivity ..........................................-29dBV (35mV) @ 1Pa Impedance ..................................................