User guide

Connecting
& Syncing
Connecting the earphone
1. Plug in the earphone to the earphone jack of the AK100.
Connecting to a computer
1. Power on the AK100 and PC or Mac.
2. When using the Micro USB cable to connect AK100
to the computer. The connection mode selection
window will be displayed on the screen.
- Charging & playing: The AK100 can function normally
while being recharged.
User Guide
Use only the Micro USB cable included with the product to
ensure safe operation.
Check that it is connected to a high-power USB 2.0 port.
Connecting to a low-power USB port (some keyboards,
USB hubs without their own power supply, etc.), may
prevent normal charging.
Once the computer goes into standby mode, the device
may not be charged.
Complete charging time is about 5 hours and 30 minutes.
(Fully discharged, with power off)
Charge the product while it is powered off. When charging
during normal operation, the full charge display may not be shown.
Using the product during charging may require additional
time for a full charge or the battery may not fully recharge.
Charge and keep the product at room temperature.
Exposure to excessive heat or cold may adversely affect
charging performance.
Battery performance may decline with age and number of recharges.
Charging
1. Turn on your PC or Mac.
2.
Use the Micro USB cable and connect the AK100 to the
computer to automatically charge the built-in battery.
Getting Started 05