Instructions / Assembly

B 1 pcs

A 1 pcsA 1 pcs

Lorem ipsum

Thank you for purchasing our product! We hope you enjoy many years of safe

and useful ownership. Please see below for instructions on assmebly of

your new Monolith Fire Nook.

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY

Assembly

It is highly recommended that you read and follow these instructions and recommendations

for using your Fire product safely and securely. Improper use or assembly of this product can

lead to damage of property as well injury or death. Please use extreme caution and take all

safety precautions when using this product.

Make sure this prodcut is not damaged prior to use.

This product is made from lightweight materials, placing a base of wood under the console,

and in the re nook is highly recommended during use to ensure the product is weighed down.

Be very careful when making contact with this product when it is going to be used. With a re

going it will be hot enough to burn you, and the lightweight material can be moved easily by

negligent contact or impact. This sort of contact with the product can lead to property

damage and personal injury or death.

Place this Fire product in an open and secure area outdoors with unencumbered ventilation

and without proximity to other items that can burn or catch re while near or in contact with an

open ame. This product should be placed over a heat resistant surface only.

The bottom of the re nook should be lled with at least a 1.5 inch bed of sand. Sand is not

included and must be purchased or acquired separately. Do not use normal dirt as this can

damage your product and stie your re. Sand creates a stable base for re logs to rest on and

for cleaning up ash and coals once your re is safely out and cooled to ambient temperatures.

Sand can also be used to extinguish an active re.

This re nook is a wood burning product, do not use other fuel sources as they can burn

at higher temperatures and lead to damage of the product, as well as damage to your property,

or personal injury and death.

Do not use chemical re lighting aids or highly ammable lighting uids as these can create

unsafe conditions to light a re, and can lead to personal injury.

Safety Before Use:

Use and Safety

• Carefully remove all package materials from the parts in your package.

Step One:

• Carefully lower and set Part B into the top opening of Part A.

Step One:

B 1 pcs

A 1 pcsA 1 pcs

PAGE 1
Assembly Use and Safety PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY It is highly recommended that you read and follow these instructions and recommendations for using your Fire product safely and securely. Improper use or assembly of this product can lead to damage of property as well injury or death. Please use extreme caution and take all safety precautions when using this product. Thank you for purchasing our product! We hope you enjoy many years of safe and useful ownership.