User's Manual

Astera LED Technology GmbH
User Manual for AX5 TriplePAR™ 2017-09-08
Page | 9
3.4 FILTER
INSERT A FILTER:
STEP 1: Slide the filter noses into the matching slots. When using the
Wallwash Filter, make sure to align its triangles with the charging
pins to ensure its elliptical beam gets displayed correctly.
STEP 2: Open the filter release by either pressing the button from the side
or pulling it from the top outwards.
STEP 3: Press the filter down firmly, then stop holding the filter release to
lock in the filter
REMOVE A FILTER:
Open the filter release, put your finger into the cutout half-circle and lift the
filter out.
FILTER EFFECT: