User's Manual

Astera LED Technology GmbH
User Manual for AX5 TriplePAR™ 2017-09-08
Page | 20
6.11 INPUT SELECT
The light accepts several input sources. By default, it is set to AUTO. In this mode, it listens to all
sources, and the first source that becomes active is latched. Once a source is latched, the
light will not listen to any other source anymore.
This latched source is cleared by powering down the light or changing the INPUT SELECT
manually.
Auto mode; the lights waits for
any input signal and latches the
first detected source.
In standalone mode, neither
wireless DMX nor remote control
is accepted.
The light can be control by the
AsteraApp™, but any DMX
signal is ignored.
Only Astera wireless DMX is
accepted, all other sources are
ignored.
Only CRMX/W-DMX wireless
DMX is accepted, all other
sources are ignored.
The following table shows what sources are accepted for each setting:
Source INPUT SELECT
AUTO, none latched
AUTO, STANDALONE latched
AUTO, REMOTE CONTROL latched
AUTO, Astera wir
el. DMX latched
AUTO, CRMX wirel. DMX latched
STANDALONE
REMOTE CONTROL
Astera wirel. DMX
CRMX wirel. D
MX
AsteraApp™: change colors
●
●
●
AsteraApp™: STANDBY, RUNTIME, ALARM
●
●
●
●
●
●
AsteraApp™: DMX Settings
●
●
●
●
●
●
●
●
Astera Wireless DMX
●
●
●
CRMX Wireless DMX
●
●
●
Infrared Remote
●
●
●
●
●
●
The Light’s Control Panel
●
●
●
●
●
●
●
●
●
HINT:
To avoid the light automatically latching onto CRMX while you want to control it by remote
control, please do UNPAIR CRMX (chapter 6.17). As soon as the remote control is latched, the
CRMX receiver will no longer accept pairing requests.
Main menu:
INPUT SELECT
INPUT SELECT
AUTO
INPUT SELECT
STANDALONE
INPUT SELECT
REMOTE CONTROL
INPUT SELECT
Astera wirel.DMX
INPUT SELECT
CRMX wirel. DMX