User's Manual

Astera LED Technology GmbH
User Manual for AX5 TriplePAR™ 2017-09-08
Page | 29
6.18 STANDALONE
Select one of the predefined
patters, see table below.
Sets the dimmer level.
The time that one cycle of the
program takes to complete.
The fade behavior between
each step of the program.
0% means, no fading
100% means full fading, fade-is
directly followed by fade-out.
The color palette of the
programs consist of up to four
colors. They can be set
individually. See chapter 6.12 for
details on how to set a color.
The AsteraApp™ can control
sets of lights individually. The set
address can be 1 to 254. This
setting is normally done by the
set-wizard in the AsteraApp™.
Several lights can form a virtual
“big” light. Programs like running
light will then run over all those
lights one by one. This
parameter tells how many lights
should form that virtual light; up
to 32.
Tells the lights position in the big
virtual light, 1..32.
Group addressing is supported
by the ARC2, please refer to the
ARC2 manual.
Main menu:
STANDALONE
Standalone:
PROGRAM
Standalone:
INTENSITY
Standalone:
SPEED
Standalone:
FADE
Standalone:
COLOR C1
Standalone:
COLOR C4
Standalone:
SET ADDRESS
Standalone:
SET SIZE
Standalone:
POS IN SET
Standalone:
GROUP ADDRESS