User manual

10
To assign lights to Groups and build Sets this we recommend to use the ARC2, the ARC2 Quick Start
Guide explains this process well. Alternatively you can take an ART3, go to Setup > Create a Set or
respectively to Setup > Remote Setup > Remote Group. Lights with display and 5 buttons also offer
the chance to change their group. To do this hold the menu button for 3 seconds > choose Auto
Settings > Group > select a group with the + and – buttons and confirm with Enter.
Troubleshoot
Lights don’t react and display says NO DMX SIGNAL:
The DMX cable is not connected to the ART3 or to the DMX controller.
Lights don’t react and display says RECEIVING DMX:
The DMX cable is connected but the ART3 does not receive any data. The DMX controller might be
set to blackout or might have problems.
Lights react incorrectly:
Most likely the DMX addresses of the light or the DMX controller are not set correctly.