User manual

13
Troubleshoot
The connected fixtures do not display anything:
As soon as the ART3 receives a new program the display will show this program which confirms that
it is receiving data. If you see that the program names on the display are changing the link to the
remote control is ok and there must be a problem with the connected fixture. Try to connect another
fixture.
Fixtures display the effects incorrectly:
Make sure you have set all connected fixtures to 3-channel DMX and make sure you have selected
the correct amount of connected pixels.
Fixtures does not support 3-channel or 6-channel DMX:
3-channel DMX (RGB) is the most common DMX protocol and is supported by most DMX fixtures. If
your fixture does not support 3-channel DMX or 6-channel DMX (with channel 4,5,6 set to zero),
please use another DMX fixture.