User manual

Standalone to keep the last input signal
(for example 1 color) until another
input source is chosen.
Auto Automatically chooses an input
source
AC Failure Emergency Light If no AC signal is detected, the
light turns white.
No Action no action
Blackout If no AC signal, all light turns
black.
Manual White Calibration: You can enable automatic white calibration or
manually adjust the red, green and blue levels that
are used to display white color.
Radio Pin: The Radio Pin makes it possible for different customers to operate their
lamps at the same place without influencing other lamps. The 4-digit pin
can be set to a unique value and paired with selected lamps. To activate
the radio pin, choose a pin on lamps and remote control, then press PAIR
WITH LAMPS.
Factory Reset: Selecting THIS REMOTE will reset all settings including keylocks and all
MEMORY programs.
Resetting LAMPS will ask you to tap individual lamps to select which of
the lamps in range you want to reset.
For event rental companies a factory reset of the ARC2 remote should be
done after each rental job to avoid misleading settings from customers.
13