User's Manual

PRODUCT OVERVIEW
When at top Navigation: When inside Main Menu:
ON/OFF
Enter Main Menu Back to previous Menu
Reset Settings Scroll down
Change Input Select Scroll up
Set DMX Address Choose / Confirm
Color adjustment
Brightness intensity and runtime control
Use the menu buttons ( menu, +, - ,enter ) to navigate
through the main menu.
Settings for color adjustment and brightness / runti-
me are directly accessible by two symbol buttons.
USING THE AX2 PIXELBAR
Please not: a new AX2-50/-100 needs a few seconds of charge to disable its shipping mode.
3. Switching ON or OFF
On/O, Static Colors, Preprogrammed Eects
Settings, Complex eects, Talkback
Control from DMX consoles via CRMX or W-DMX
Control from DMX consoles via DMX cable
2. More control options
1. Control options - integrated control panel
DMX
DMX
APP
IR
OFFON
1s
3s 5s
1x
3x 5x
5. Linking to a CRMX transmitter
6. Charging
While the power cable is connected, the display shows the charging status.
Charge immediately when the battery is empty. Do not store the unit when the battery is empty.
Charging time is approximately 5 hours.
ENTER
2. AX2 PixelBar
3. AsteraBox
10 sec
WAIT
+
4. AsteraBox
*click*
4. Pairing with the AsteraApp
Turn the AX2-50/-100 into „blue mode“ by holding down the power button for 3 seconds.
CLEANING AND MAINTAINING
Caution: Liquids entering the housing of the device can cause a short circuit and
damage the electronics. Do not use any cleaning agents or solvents.
www.astera-led.com
1. AX2 PixelBar
1x
3x 5x
1x
3x 5x
4 5